How To Flash We L7 Firmware [Stock ROM]

in this article, you will learn how you can flash We L7 Firmware file. So if you are in this article, then either your phone is working properly.

You might have tried to root it. However, if you do not like the custom ROMs you have installed and want to go back to the original operating system.

Anyway, all the solution to your problems with your phone is currently available in this article. You just need some material like We L7 Stock ROM, USB drivers and flash tool that is in it.

For the ease of my readers, I have divided this method into different parts.

1. In the first section, we will talk about the We L7 Firmware (flash file) benefits and link it to download.

2. The other part is the necessary tools and pre-requirements to install the We L7 Firmware.

3. And in the last part, we will guide you How to flash this We L7 ROM file,

To perform this advance process of Flashing stock ROM please Go Step by step. If you got any error then leave a comment.

The Advantages Of We L7 Stock ROM:

A Soft Brick or a Software Brick, is usually just when you’re phone is stuck in a boot loop, and as the name implies, is caused by a software error on Android.

Usually the lack of a system to boot from or some other minor software bug that glitching boot.

They are easily fixable by flashing the We L7 stock ROM on We L7 through recovery or with SP Flash Tool.

If your We L7 device turns to a soft-brick, it may:

• Keeps Rebooting;
• Boots Straight Into Recovery;
• Boots Straight Into its Bootloader;
• Freeze at the startup screen or boot Animation;

We L7 Stock ROM Details:

Download We L7 Flash File:

Gapps File:	Included
Device Supported:	We L7
Tool Supported:	SP Flash Tool
Processor:	MediaTek MT6580
Os:	Android
Download:	We L7 MT6580 20102017.zip

Pre-requirements to Flash We L7 Stock Firmware File:

• Supported Phone: We L7
• Charge your mobile: You may no less than a half charge.
• Laptop or PC.

1. Take We L7 Backup

Before going to install stock ROM you need to take all your messages, photos, and apps from your current smartphone. This requires a backup that you then restore on your device after flashing firmware.

How To Backup Android Phone Before Flashing Stock Firmware

---

2. Download We L7 Flash Tool And Drivers:

A.  Download and install We L7 Drivers. This is for basic communication between your device and PC.

These drivers are mainly for the devices powered by the MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the Sp flash tool for as We L7 Flash Tool this procedure there are different reasons why we will use Sp Flash Tool to unbrick the We L7.

I believe this tool is very efficient. Follow the step-by-step procedure to use One-Click Unbrick Tool and unbrick your We L7.

Disclaimer:

• Please read and understand the Full Guide Before Flashing We L7.
• Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
• Before flashing, Stock ROM We L7 must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own!

Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Flash We L7 Firmware File:

1. Download We L7 flash file zip file given above and extract it in your computer.

2. Download We L7 USB driver and set up it on your computer. In case if in case you have already put in USB driver in your computer skip this step.

3. Next, switch off your We L7 smartphone and take away the battery (it’s removable).

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover the “Flash_tool.exe” file in it. Launch it.

5. As soon as SP Flash tool is launched, click on on “Download” tab.

6. Now, click on on “Scatter-loading” button within the download tab.

7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.

8. Now click on on the “Download” button to start out the flashing process.

9. Next, join your We L7 Android device to your computer by means of the unique USB cable (without battery – whether it is battery removable) and press the volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.

As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

11. Now, shut the SP Flash tool on your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed stock ROM firmware in your We L7 Android device.

Follow Detailed Instruction We L7 Firmware Flashing With Sp Flash Tool.