Wave R9 Firmware

in this article, you will learn how you can flash install Wave R9 Firmware file. So if you are in this article, then either your phone is working properly.

Advertisement

You might have tried to root it. However, if you do not like the custom ROMs you have installed and want to go back to the original operating system

Anyway, all the solution to your problems with your phone is currently available in this article. You just need some material like Wave R9 Stock ROM, USB drivers and flash tool that is in it.

For the ease of my readers, I have divided this method into different parts.

1. In the first section, we will talk about the Wave R9 Firmware (flash file) benefits and link it to download.

2. The other part is the necessary tools and pre-requirements to install the Wave R9 Firmware.

3. And in the last part, we will guide you How to flash this Wave R9 ROM file,

To perform this advance process of Flashing stock ROM please Go Step by step. If you got any error then leave a comment.

[quads id=2]

The Advantages Of Wave R9 Stock ROM:

A Soft Brick or a Software Brick, is usually just when you’re Wave R9 is stuck in a boot loop, and as the name implies, is caused by a software error on Wave R9.

Usually the lack of a system to boot from or some other minor software bug that glitching boot.

They are easily fixable by flashing the stock ROM on Wave R9 through recovery or with SP Flash Tool.

If your Wave R9 device turns to a soft-brick, it may:

  • Keeps Rebooting;
  • Boots Straight Into Recovery;
  • Boots Straight Into its Bootloader;
  • Freeze at the startup screen or boot Animation;

Wave R9 Stock ROM Details:

Gapps File: Included
Device Supported: Wave R9
Tool Supported: SP Flash Tool
Processor: MediaTek MT6572
Os: Android 4.4.2
Download: Wave R9 MT6572 4.4.2.zip

[quads id=2]

Pre-requirements to Install Wave R9 Firmware:

  • Supported Phone: Wave R9
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC.

1. Take Wave R9 Backup

Before going to install stock ROM you need to take all your messages, photos, and apps from your current smartphone. This requires a backup that you then restore on your device after flashing firmware.

How To Backup Android Phone Before Flashing Stock Firmware


2. Download Wave R9 Flashing Tool And Drivers:

A.  Download and install Wave R9 Drivers. This is for basic communication between your device and PC.

These drivers are mainly for the devices powered by MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the Sp flash tool for this procedure there are different reasons why we will use Sp Flash Tool to unbrick the Wave R9.

I believe this tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Wave R9.

Disclaimer:

  • Please Read and understand the Full Guide Before Flashing Wave R9 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM Wave R9 must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own!

Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Wave R9 Firmware:

1. Download Wave R9 stock ROM zip file is given above and extract it in your computer.

2. Download Wave R9 USB driver and set up it on your computer. In case if in case you have already put in USB driver in your computer skip this step.

3. Next, switch off your Wave R9 smartphone and take away the battery (it’s removable).

Switch Off Melrose S9 Plus

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover “Flash_tool.exe” file in it. Launch it.

Start SPFT For Wave R9 Flash

5. As soon as SP Flash tool is launched, click on on “Download” tab.

How To Flash Wave R9 File [ROM] 1

6. Now, click on on “Scatter-loading” button within the download tab.

Wave R9 Scatter Loading

7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.

Select Wave R9

8. Now click on on the “Download” button to start out the flashing process.

Press Download For Wave R9

9. Next, join your Wave R9 Android device to your computer by means of the unique USB cable (without battery – whether it is battery removable) and press volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.

As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

Wave R9 Download Complete

11. Now, shut SP Flash tool in your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed stock ROM firmware in your Wave R9 Android device.

Follow Detailed Instruction Wave R9 Firmware Flashing With Sp Flash Tool.