In this post, we will discuss how to flash the Vivo Y22 repair firmware file. if your Vivo Y22 dead after flash or display problem for any reason this is the best solution for Vivo Y22hang on the logo.

That’s what we’re going to tell you in this post! To do it, we’ll use a free flashing tool called Sp Flash Tool. This tool will enable you to flash stock ROM of your Vivo Y22 and set up on a new Vivo Y22 Firmware  Update.

Advertisement

Vivo Y22 Firmware

The Vivo Y22 is powered by 1.3GHz quad-core processor and it comes with 1GB of RAM. The phone packs 4GB of internal storage that can be expanded. As far as the cameras are concerned, the Vivo Y22 packs an 8-megapixel primary camera on the rear and a 5-megapixel front shooter for selfies.

The Vivo Y22 runs Android 4.2 and is powered by a 1900mAh removable battery. It measures 130.40 x 66.00 x 8.70 (height x width x thickness) and weighs 126.00 grams.

The Vivo Y22 is a Dual-SIM (GSM and GSM) smartphone. Connectivity options include Wi-Fi, GPS, Bluetooth, FM, and 3G. Sensors on the phone include a Proximity sensor, Accelerometer, and Ambient light sensor.

How To Flash Vivo Y22 Firmware File [Stock ROM]

Download Vivo Y22 Firmware. If you have Vivo Y22 Smartphone. And you want to download the Stock ROM – Flash File For it. Then you are in a Correct Place, You have to do this by following the Below Guide.

[quads id=2]

The Benefit Of Vivo Y22 Stock ROM:

  • Flash Stock To Unbrick your Vivo Y22
  • Fix boot loop issue
  • Update and Downgrade
  • Vivo Y22 hang on logo fix
  • To solve the lag or stutter
  • Fix software issues.
  • Return to stock for warranty coverage.
  • If vivo y22 dead after flash

Vivo Y22 Stock ROM Details:

  • Gapps File: Included
  • Device Supported: Vivo Y22
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek MT6582
  • Os: Android
Download vivo_Y22_ALPS.JB5.MP.V1.6.
Vivo Y22 flash file Google Drive – Mshare

[quads id=2]

Pre-requirements to Install Vivo Y22 Stock Firmware:

  • Supported Phone: Vivo Y22
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC.

Take Phone Backup:

Vivo Y22 Flashing Tool And Drivers:

We will use Sp Flash Tool to unbrick the Vivo Y22 as we use for Vivo V3 Max. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Vivo Y22.

SP flash tool which is also known as the Smart Phone Flash Tool is a cross-platform application. We use the SP flash tool for Flash custom recovery, flash Stock Rom and to fix the hard brick device

. This is a very simple tool SP flash tool is used on Mediatek devices. This allows you to flash stock firmware on Mediatek smartphones and Tablets only. It will not support the devices having chipsets other than MediaTek.

Disclaimer:

  • Please read and understand the Full Guide Before Flashing Vivo Y22 Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

How To Flash Vivo Y22 Firmware:

1: Extract And Run SP flash tool.

2: Install MTK  android USB drivers.

3: Then download Vivo Y22 Firmware.

4: Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.

5: Now open SP flash tool.exe.

6: When SP flash tool open, go to download button in SP flash tool.

7: In the download tab, click on the scatter load button.

8: After locating the scatter tab, click on the download button.

9: Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)

10: When flashing is completed, a green ring will appear in SP flash tool.

11: Close SP flash tool on your computer and unplug the phone.

12: Power on the phone and enjoy.

13: After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.

Vivo Y22 Firmware

Follow Detailed Instruction Vivo Y22 Firmware Flashing With Sp Flash Tool.