Vivo X6S Plus A Firmware File [Stock ROM]

Vivo X6S Plus A
Welcome To all in one thread for Vivo X6S Plus A in this post I will share all kinds of Vivo X6S Plus A Firmware With you. Like Ota software update fastboot ROM And QFIL flash tool. So keep in touch and stay updated with your Vivo X6S Plus A software upgrade.

How To Flash Vivo X6S Plus A Firmware Stock ROM

“Vivo X6S Plus A Firmware” is the software that is provided by the vendor, or You may say that the software. Which was installed by the manufacturer of the phone is X6S Plus A Stock Rom.

The other type of the Rom is Custom Rom which advance users installed after flashing it as per they desire. Flashing a stock Firmware means installing the system image into the device’s internal flash memory.

The Benefit Of Stock Firmware:

  • Flash Stock ROM to unbrick your Vivo X6S Plus A
  • Fix the boot loop problem
  • Upgrade and Downgrade
  • Unroot or Fix Bugs on your phone
  • Fix the lag or stutter on
  • Revert to stock to gain your warranty
  • Will able to receive OTA Updates
[quads id=2]

Pre-requirements to Install Vivo X6S Plus A Stock ROM:

  • Supported Phone: Vivo X6S Plus A
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

1. Take Vivo X6S Plus A Full Backup

Before going to install Vivo X6S Plus A stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

2. Download Vivo X6S Plus A Flash Tool And Drivers:

A.  Download and install Vivo X6S Plus A Drivers. The necessary communication between your device and PC.

These drivers are mainly for the devices powered by Qualcomm chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the QFIL QPST Flash Tool for as Vivo X6S Plus A Flash Tool because of this tool is very efficient and support all kind of Qualcomm phones.

Instructions to Flash Vivo X6S Plus A Stock ROM:

1. Download and install the driver and tool above. Then launch the QFIL tool.

2. Turn off the phone (Remove the battery if possible, then insert the battery again), hold up the VOLUME KEY and plug in the USB cable to connect to the computer.

3. On the QFIL tool, select the files, in turn, select the files in the Vivo X6S Plus A ROM folder.

4. After clicking Download, wait for the flash process to finish, the time is about 5-10.

5: During the flashing process, your device will restart automatically.

6. Once flashing is completed, Close the Qfil Tool on your computer and disconnect your Android Smartphone from the computer.

Congratulations, You have successfully installed Vivo X6S Plus A Stock ROM using QFIL Flash tool.

Follow Detailed Instruction Vivo X6S Plus A Firmware Flashing With Qfil Flash Tool.

Disclaimer:

  • Read and understand the Full Guide before flashing.”Vivo X6S Plus A Firmware”.
  • Use these instructions at your own risk.
  • Before flashing, Stock ROM on Vivo X6S Plus A must have a 70–80% charge.
[adinserter block=”4″]

Vivo X6S Plus A Firmware:

Disadvantage

Gapps: Included No Root
Device Supported: Vivo X6S Plus A No Twrp And Nand Backup
Tool: QPST Tool – QFIL Qualcomm Flash Image Loader No Customization And Over cloaking
Soc: Qualcomm MSM8976 No ADB Ad Block
Os: Android 5.1 Pre-installed OEM apps

[quads id=2]

Vivo_X6S_Plus_A_PD1515BD_1.15.8_LA.BR.1.3.2_04130_8976.0_MSM8976_01042016_QFIL.zip