Download Firmware/Flash File For Vivo V3:
Welcome To all one thread for Vivo V3 in this post I will share all kinds of Vivo V3 Firmware With you. Like Ota software update fastboot ROM And QFIL flash tool. So keep in touch and stay updated with your Vivo V3 software upgrade.
“Vivo V3 Firmware” is the software that is provided by the vendor, or You may say that the software. Which was installed by the manufacturer of the phone is Vivo V3 Stock ROM
The other type of the Rom is Custom Rom which advanced users installed after flashing it as per their desire. Flashing a stock Firmware means installing the system image into the device’s internal flash memory.
The Benefit Of Stock Firmware:
- Fix the boot loop problem
- Upgrade and Downgrade
- Unroot or Fix Bugs on your phone
- Fix the lag or stutter on
- Revert to stock to gain your warranty
- Will able to receive OTA Updates
Download Firmware:
Vivo V3 PD1524F EX A 1.10.11.zip
- Supported Phone: Vivo V3
- Charge your mobile: You may no less than a half charge.
- Laptop or PC: To execute this installation, you must use a PC or Laptop.
- Take Vivo V3 Full Backup
Before going to install Vivo V3 stock ROMÂ you need to take a backup of all your messages, photos, and apps from your smartphone.
Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.
Most smartphones back up automatically in the background in case of incidents. To ensure a complete transition to your new device, a full backup is necessary.
- Download Vivo V3 Flash Tool And Drivers:
- A. Download and install Vivo V3 Drivers. The necessary communication between your device and PC.
- These drivers are mainly for the devices powered by Qualcomm chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.
- B. We use the QPST Flash Tool as Vivo V3 Flash Tool because this tool is very efficient and support all kind of Qualcomm phones.
How To Flash Stock ROM On Vivo V3 With the use of QPST Flash Tool:
Download and install Qualcomm USB Driver on the Computer. If in case Qualcomm Drivers are already installed on the computer, then SKIP this step.
Download and install QPST Tool on your Computer. Once QPST Tool is installed on the computer, Go to C:\Program Files\Qualcomm\QPST\bin\ folder. There, you will be able to see the following files:
Now, Connect your Qualcomm Device to the Computer using the USB Cable.
Now, Open QPST Config:
Once QPST Configuration is Launched, Click on the Port Menu.
Now, Click on the Starts Clients Menu and Select Software Download.
Now, You will be able to see the QPST Software Download Dialog Box.
Now, Click on the Phone Image Browse Button and Locate the Firmware (.hex) on your computer that you want to Flash on your Qualcomm Device (assuming you have already downloaded the firmware on the computer).
Now, Under the Boot Image, Click on the Browse button and locate the BOOT_LOADER.HEX file (comes with the firmware).
Now, Click on the Start Button to begin the Flashing process.
Once Flashing is completed you will see the Green Bar at the end of Flashing.
Now, Disconnect your Qualcomm device from the computer and restart it.
Disclaimer:
- Read and understand the Full Guide before flashing.”Vivo V3 Firmware”.
- Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of the information in this guide.
- Before flashing, Stock ROM must have a 70–80% charge.
