Videocon Z45 QSTAR Plus

This article contains the Videocon Z45 Firmware Flash File. That will allow you to recover your Videocon Z45 mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version. You’ll find these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.


If you are trying to Flash a Stock Rom on your Videocon Z45 QSTAR Plus download only drivers as ADB drivers will not help in it. Here we will provide a free download for Download Videocon Z45 QSTAR Plus firmware. If you are looking forward to how to download and install this Videocon Z45 QSTAR Plus then read very all the steps.

The  Videocon Z45 QSTAR Plus Run on Android 5.1 Lollipop OS Powered by the SPD SC7731 Processor, it is a Dual SIM (GSM and GSM) Smartphone/Tablet, Connectivity options include Wi-Fi, GPS, Bluetooth, Infrared, 3G and 4G. Sensors on the phone include the Proximity sensor, Accelerometer, and Ambient light sensor.

Videocon Z45 QSTAR Plus Firmware Flash File [ROM]:

We will use the SPD Download Tool flash Firmware on Videocon Z45 QSTAR Plus Firmware as we use for FPT X50. This tool is very efficient. Just Follow the step-by-step procedure to use the One Click Unbrick Tool and unbrick your SPD Phone.

SPD Download Tool and is used to Manually Upgrade or flash Spreadtrum Android Smartphones or Tablets. SPD Download Tool is used to flash only Stock Rom or Custom OR Stock Firmware on Spreadtrum Devices. Flash File comes in .zip Format. To use the Spd Factory Update tool Flash Stock ROM first need to properly install the latest Spreadtrum Drivers.

The Benefit Of Stock Firmware:

  • Flash Stock To Unbrick your Videocon Z45 QSTAR Plus
  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Videocon Z45 QSTAR Plus
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Videocon Z45 QSTAR Plus
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty.

Videocon Z45 QSTAR Plus Firmware Details:

  • Gapps File: Included
  • Device Supported: Videocon Z45 QSTAR Plus
  • Tool Supported: SPD Flash Tool
  • Processor: SPD-SC7731
  • Os: Android 5.1 Lollipop
  Download   Videocon Z45 QSTAR Plus

Pre-requirements to Install Firmware on Videocon Z45 QSTAR Plus:

  • Supported Phone: Videocon Z45 QSTAR Plus
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Phone Backup:

Flashing Tool And Drivers:


  • Please Read and understand the Full Guide Before Flashing Videocon Z45 QSTAR Plus Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Bin Packet load Error when flasing Videocon Z45 QSTAR Plus: If you ever got Bin Packet Error then simply download and try flashing the firmware with this version of SPD Upgrade Tool.

How to Write IMEI on Videocon Z45 QSTAR Plus: After flashing the stock firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI on Spreadtrum Devices.

Instructions to Install Firmware on Videocon Z45 QSTAR Plus:

Step 1. Install Spreadtrum Drivers.

Step 2. Install the SPD Download Tool.

Step 3. Open the Research download tool > bin folder.

Step 4. Launch ResearchDownload.exe.

Step 5. Click on the Load Packet icon (top left corner).

Step 6. In the window that pops up, navigate to the location of the Videocon Z45 QSTAR PlusFirmware .pac file, select it then click Open.

Step 7. The PAC file should now be loaded (its name should appear at the top).

Step 8. Click the Settings Icon (top left corner).

Step 9. In the box that pops up, untick any item(s) you do not wish to flash then click OK. Ignore this step if you wish to flash all files.

Step 8. Click the Start Downloading button.

Step 9. You should see Waiting…. under the Progress bar.

Step 10. Switch off the phone (still with battery inside) then connect it to the PC via a USB cord (note that you might need to hold the volume decrease button while connecting to PC on some phones) and flashing should begin. DO NOT interrupt.

Step 11. Once flashing is complete, you’ll see Passed.

Step 12. Click on the Stop downloading icon then disconnect the phone from the PC and boot.

Follow Detailed Instruction Videocon Z45 QSTAR Plus Firmware Flashing With Spd Flash Tool.