Welcome To all in one thread for Vestel Venus 5.0V VSP250s in this post I will share all kinds of Vestel Venus 5.0V VSP250s Firmware With you. Like Ota software update fastboot ROM And QFIL flash tool. So keep in touch and stay updated with your Vestel Venus 5.0V VSP250s software upgrade.
How To Flash Vestel Venus 5.0V VSP250s Stock ROM:
“Vestel Venus 5.0V VSP250s Firmware” is the software that is provided by the vendor, or You may say that the software. Which was installed by the manufacturer of the phone is [highlight color=”yellow”]Vestel Venus 5.0V VSP250s Stock Rom.[/highlight]
The other type of the Rom is Custom Rom which advance users installed after flashing it as per their desire. Flashing a stock Firmware means installing the system image into the device’s internal flash memory.
Pre-requirements to Install Vestel Venus 5.0V VSP250s Stock ROM:
- Supported Phone: Vestel Venus 5.0V VSP250s
- Charge your mobile: You may no less than a half charge.
- Laptop or PC: To execute this installation, you must use a PC or Laptop.
- Take Vestel Venus 5.0V VSP250s Full Backup
Before going to install Vestel Venus 5.0V VSP250s stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.
Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.
- Download Vestel Venus 5.0V VSP250s Flash Tool And Drivers:
- A. Download and install Vestel Venus 5.0V VSP250s Drivers. The necessary communication between your device and PC.
- These drivers are mainly for the devices powered by Qualcomm chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.
- B. We use the QFIL QPST Flash Tool for as Vestel Venus 5.0V VSP250s Flash Tool because of this tool is very efficient and support all kind of Qualcomm phones.
Instructions to Flash Vestel Venus 5.0V VSP250s Stock ROM:
1. Download and install the driver and tool above. Then launch the QFIL tool.
2. Turn off the phone (Remove the battery if possible, then insert the battery again), hold up the VOLUME KEY, and plug in the USB cable to connect to the computer.
3. On the QFIL tool, select the files, in turn, select the files in the Vestel_Venus_5.0V_VSP250S_MSM8610_06052016_QPST ROM folder.
4. After clicking Download, wait for the flash process to finish, the time is about 5-10.
5: During the flashing process, your device will restart automatically.
6. Once flashing is completed, Close the Qfil Tool on your computer and disconnect your Android Smartphone from the computer.
- Congratulations, You have successfully installed Stock ROM using the QFIL Flash tool.
Follow Detailed Instruction Firmware Flashing With Qfil Flash Tool.
Vestel Venus 5.0V VSP250s Firmware Details:
|Gapps: Included||No Root|
|Device Supported: Vestel Venus 5.0V VSP250s||No Twrp And Nand Backup|
|Tool Supported: QPST Tool – QFIL||No Customization And Over cloaking|
|Soc: Qualcomm MSM8610||No ADB Ad Block|
|Os: Android||Pre-installed OEM apps|