Unbrick Swift Tab 73B5G MT6582 Android 4.2.2 Spft

Unbrick Swift Tab 73B5G MT6582 Android 4.2.2 Spft

[box type=”info” align=”” class=”” width=””]You Can Use The Below Method For Upgrade Swift Tab 73B5G MT6582 Android 4.2.2 /And If You Want To Hard Reset It By Flashing The Stock Rom/ In Case If You Are Using Any Custom Rom And Want Back To Stock Rom And Official Firmware Or Facing The Boot loop Problem. This Method Is Also Useful For Sudden Death/Bricked/Not Power And Also After Flashing The Stock Rom imei Null or Unknown Baseband Problems Can Be Solve.[/box]

[box type=”download” align=”” class=”” width=””] Download SP Flash Tool Newest SP Flash Tool is very useful utility for fixing soft brick or bootloop cases especially for the Media Tek devices. You could flash Stock or Custom ROMs of your choice. Download MediaTek USB VCOM drivers

Windows 10/Pro users: READ: How To Install MTK VCOM Driver On WINDOWS 10 (32 & 64 bits)

Download the Stock Rom For Galaxy A5 SM-A5000 MT6582 :-


[box type=”note” align=”” class=”” width=””]

Next you need to install drivers in order to connect your device properly, just extract Driver_Auto_Installer_v1.1236.00.zip, and double-click “Install.bat”, and it will automatically install the necessary drivers, and you need to allow permissions for these drivers to be installed.

2 3 [/box]

Swift Tab 73B5G MT6582 Stock Rom Flashing With SP Flash Tool :-

[box type=”shadow” align=”” class=”” width=””]

Check your Phone battery, you should have at least more than 50% and switch off your phone.
Unzip both SP Flash Toolv5.1532.zip and Stock rom.zip
Install and launch SP Flash Tool as shown below :-

214829didxo68eoojjill1-jpg-thumb Next click on the “Scatter loading” button and locate the scatter text from the unzipped ROM earlier, as shown below :- 214842lgnyk722wwsymyoy-jpg-thumb Now click the “Download” button and connect your device (in off state) to the PC or Laptop via USB Cable and immediately press Volume Up button momentarily, and your device will be detected accordingly and initiating the flashing process, as shown below :- ee It will complete the flash process in a minute or so, and when it is complete and successful, you see the yellow full bar and a big check mark as shown below :- z-9-wm[/box] [box type=”success” align=”” class=”” width=””] Now, you can switch on your device.[/box]

    Swift Tab 73B5G MT6582 Unknown Baseband, Swift Tab 73B5G MT6582 imei Null, Swift Tab 73B5G MT6582 Official Firmware, Swift Tab 73B5G MT6582 spft files, swift-tab stock rom
Copyright © 2018 Aio Mobile Stuff
Please disabled adblocker to keep our website live.After Disabled Click Refresh button