Infinix Hot 3 LTE X553 Firmware File

Welcome To all in one thread for Infinix Hot 3 LTE X553. In this post, I will share all kinds of Infinix Hot 3 LTE X553 Firmware With you, like Ota software update fastboot ROM And QFIL flash tool. So keep in touch and stay updated with your Infinix Hot 3 LTE X553 software upgrade.

Why would you want to flash Firmware on your Infinix Hot 3 LTE X553?

“Infinix Hot 3 LTE X553 Firmware” is the software that is provided by the vendor, or You may say that the software. Which was installed by the manufacturer of the phone In,finix Hot 3 LTE X553 Stock Rom.

The other type of the Rom is Custom Rom which advanced users install after flashing it as per their desire. Flashing a stock Firmware means installing the system image into the device’s internal flash memory.

- Advertisement -

The Benefit Of Stock Firmware:

  • Flash Stock ROM to unbrick your Infinix Hot 3 LTE X553
  • Fix the boot loop problem
  • Upgrade and Downgrade
  • Unroot or Fix Bugs on your phone
  • Fix the lag or stutter on
  • Revert to stock to gain your warranty
  • Will able to receive OTA Updates

Infinix Hot 3 LTE X553 Firmware Details:

  • Gapps: Included
  • Device Supported: Infinix Hot 3 LTE X553
  • Tool Supported: QPST Tool – QFIL Qualcomm Flash Image Loader
  • Processor: Qualcomm
  • Os Ver:

Download:

[quads id=2]

Pre-requirements to Install Infinix Hot 3 LTE X553 Stock ROM:

  • Supported Phone: Infinix Hot 3 LTE X553
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Infinix Hot 3 LTE X553 Full Backup
Before going to install Infinix Hot 3 LTE X553 stock ROM, you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.
Most smartphones back up automatically in the background in case of incidents. To ensure a complete transition to your new device, a full backup is necessary.

Download Infinix Hot 3 LTE X553 Flash Tool And Drivers:

A.  Download and install Infinix Hot 3 LTE X553 Drivers—the necessary communication between your device and PC.

These drivers are mainly for the devices powered by Qualcomm chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the QFIL QPST Flash Tool as Infinix Hot 3 LTE X553 Flash Tool because this tool is very efficient and support all kind of Qualcomm phones.

Instructions to Flash Infinix Hot 3 LTE X553 Stock ROM:

1. Download and install the driver and tool above. Then launch the QFIL tool.

2. Turn off the phone (Remove the battery if possible, then insert the battery again), hold up the VOLUME KEY and plug in the USB cable to connect to the computer.

3. On the QFIL tool, select the files; in turn, select the files in the Infinix Hot 3 LTE X553 ROM folder.

4. After clicking Download, wait for the flash process to finish; the time is about 5-10.

5: During the flashing process, your device will restart automatically.

6. Once flashing is completed, Close the Qfil Tool on your computer and disconnect your Android Smartphone from the computer.

Congratulations, You have successfully installed Infinix Hot 3 LTE X553 Stock ROM using the QFIL Flash tool.

Follow Detailed Instruction Infinix Hot 3 LTE X553 Firmware Flashing With Qfil Flash Tool.

Disclaimer:

  • Read and understand the Full Guide before flashing.”Infinix Hot 3 LTE X553 Firmware”.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from the use of information in this guide.
  • Before flashing, Stock ROM on Infinix Hot 3 LTE X553 must have a 70–80% charge.

2 COMMENTS

Comments are closed.