Huawei Ascend Y330-U01 Firmware Flash Files

Huawei Ascend Y330-U01 Firmware Flash Files

Today I will show you how to flash Huawei y330-u01 firmware update file. if you are not enabled to flash Huawei y330-u01 sd card update then flash firmware via Sp flash tool. Download the files given below and follow the steps.

Why would you want to flash Firmware on your Huawei Ascend Y330-U01?

There are various reasons to flash Firmware on Oukitel K9. For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.  If you’re going to reset your phone hard and you cannot access the recovery menu. But most of the problems that cause flashing stock ROM are.

The Benefit Of Huawei Ascend Y330-U01 Firmware:

  • Flash Stock ROM To Unbrick
  • Update and downgrade
  • Unroot or fix bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty
  • Keeps rebooting issue
  • if your phone boots straight into recovery
  • Phone boots straight into its bootloader

Huawei Ascend Y330-U01 Firmware Details:

  • Gapps File: Included
  • Device Supported: Huawei Ascend Y330-U01
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek MT6572
  • OS: Android

Download Huawei Ascend Y330-U01 Flash File:

Requirements to flash Huawei Ascend Y330-U01 Stock ROM:

  • Supported Phone: Huawei Ascend Y330-U01 Stock ROM
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take  Backup

Before going to install Huawei Ascend Y330-U01 stock ROM, you need to take all your messages, photos, and apps from your current smartphone. This requires a backup that you then restore on your device after flashing firmware.

Most smartphones automatically make a backup in the background, in case something happens. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware


Download Huawei Ascend Y330-U01 Flash Tool And Drivers:

A. Download and install Huawei Ascend Y330-U01 Drivers. The necessary communication between your device and PC.

These drivers are mainly for the devices powered by MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the Sp flash tool for as Huawei Ascend Y330-U01 Flash Tool procedure there are different reasons why we will use Sp Flash Tool to unbrick the Huawei Ascend Y330-U01.

I believe this tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Huawei Ascend Y330-U01.

Instructions to Flash Huawei Ascend Y330-U01 Stock ROM:

1. Download Huawei Ascend Y330-U01 flash file zip file is given above and extracts it on your computer.

2. Download Huawei Ascend Y330-U01 USB driver and set up it on your computer. In case if in case you have already put in a USB driver in your computer skip this step.

3. Next, switch off your Huawei Ascend Y330-U01 smartphone and take away the battery (it’s removable).

Switch Off Huawei Ascend Y330-U01

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover the “Flash_tool.exe” file in it. Launch it.

Start SPFT For Huawei Ascend Y330-U01 Firmware Flash

5. As soon as the SP Flash tool is launch, click on on “Download” tab.

How To Flash Huawei Ascend Y330-U01 Firmware File [ROM] 1

6. Now, click on on “Scatter-loading” button within the download tab.

Huawei Ascend Y330-U01 Firmware Scatter Loading

7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference, see the picture given below.

Select Huawei Ascend Y330-U01 Firmware

8. Now click on on the “Download” button to start the flashing process.

Press Download For Huawei Ascend Y330-U01 Firmware

9. Next, join your Huawei Ascend Y330-U01 Android device to your computer using the USB cable (without battery – whether it is battery removable) and press volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.

As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

Huawei Ascend Y330-U01 Firmware Download Complete

11. Now, shut the SP Flash tool in your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed stock ROM firmware in your Huawei Ascend Y330-U01 Android device.

Follow Detailed Instruction Huawei Ascend Y330-U01 Firmware Flashing With Sp Flash Tool.

Disclaimer:

  • Please read and understand the Full Guide Before Flashing Huawei Ascend Y330-U01 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM Huawei Ascend Y330-U01 must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own!

Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Check Also

itel L6503 Firmware

Itel V41 Firmware Flash File [Stock ROM Download]

The specific Itel V41 Firmware comes with a Stock ROM of Itel V41. This helps …

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.