In case you’ve bricked your Phone or simply Wish to clean install the Stock ROM on Umiio J7 Pro then you definitely are in the best place. Umiio J7 Pro is based on MTK CPU. To install Stock firmware on Umiio J7 Pro Media Tek powered device, you require Flashing Tool known as Sp Flash Tool, Formally also called Smart Phone Flashing Tool. Download the Umiio J7 Pro Stock Firmware, drivers, and SP flash tool, then you can carry out our instructions on setting up the firmware on Umiio J7 Pro.
How to Flash Firmware on Umiio J7 Pro:
We will use Sp Flash Tool to unbrick the Umiio J7 Pro. This tool is really very efficient. Just Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Umiio J7 Pro.
Sp Flash Tool and it is used to Manually Upgrade or flash MTK Android Smartphone or tablet. Sp Flash Tool is used to flash only Stock Rom or Custom Firmware on Media Tek Devices which comes in .zip Format. To use Smartphone Flashing tool with Umiio J7 Pro you first need to properly install the latest Vcom USB Drivers for Umiio J7 Pro.
The Benefit Umiio J7 Pro Of Stock ROM:
You Can Use The Following Flash Files For Upgrade or Unbrick Umiio J7 Pro / And If You Want To Hard Reset It By Flashing The Stock ROM/ In Case If You Are Using Any Custom Rom And Want Back To Stock Rom And Official Firmware Or Facing The Boot Loop Problem. This Method Is Also Useful For Sudden Death/Bricked/Not Power And Also After Flashing The Umiio J7 Pro Stock Firmware IMEI Null or Unknown Baseband Problems Can Be Solved.
Firmware Details:
- Gapps File: Included
- Device Supported: Umiio J7 Pro
- Tool Supported: SP Flash Tool
- Processor: MediaTek –MT6580
- Os: Android 5.1 Lollipop
Download File | Description |
Download | Umiio J7 Pro MT6580 5.1.zip |
Pre-requirements to Install Stock Firmware on Umiio J7 Pro:
- Supported Phone: Umiio J7 Pro
- Charge your mobile: You may no less than a half charge.
- Laptop or PC: To execute this installation, you must use a PC or Laptop.
Take Phone Backup:
- Backup your Call Log – Contacts – Sms – Etc With G Backup
- Backup your current Firmware With MTK Droid Tool
- Backup your backup IMEI NVRAM
Flashing Tool And Drivers:
- Smartphone Flash Tool: Download the latest SP Flash tool and extract it (Install)
- VCOM driver: Get VCOM Driver and set up on your pc (still works with MT67xx phones)
Disclaimer:
- Please Read and understand the Full Guide Before Flashing Umiio J7 Pro Stock Rom.
- Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
- Make sure that the USB drivers for your device are installed on the computer.
- Your smartphone must have a 70–80% charge.
- Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.
Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.