Ulefone Be Pure Firmware Flash Files
Ulefone Be Pure Mt6572 Android 4.4 Kitkat Official Firmware Flash Files
Readme Once: Take a Backup: If you are going to flash the above Firmware on your Ulefone Be Pure Mt6572 device, then take a backup of important data such as Contacts, Call logs, SMS, and other data because your data will be deleted after flashing the stock firmware.
1- Backup your Call Log – Contacts – Sms – Etc With G Backup
2- Backup your current Firmware With MTK Droid Tool
3- Backup your backup IMEI NVRAM
The firmware shared on this page is officially released by the company and helps you to recover your Phone if you ever get bootloop, software error, update error, hanging, Unknown Baseband, IMEI Null and dead issue.
How To Flash Ulefone Be Pure Mt6572 Android 4.4 Kitkat With Sp Flash Tool:-
Download SP Flash Tool. – MTK Android USB Drivers. – Ulefone Be Pure Flash Files.
- Extract And Run the SP flash tool.
- Install MTK Android USB drivers.
- Then download the Firmware file/Flash file/Rom for your phone from below.
- switch off your mobile remove the battery (if removable), reinsert the battery and plug the USB cable into the charging socket.
- Now open SP flash tool.exe.
- When the SP flash tool opens, go to the download button in the SP flash tool.
- In the download tab, click on the scatter load button.
- After locating the scatter tab, click on the download button.
- Now connect your smartphone with a USB cable and press the volume up or volume down key for easy detection (remove and re-insert your phone battery if it is removable)
- When flashing is completed, a green ring will appear in the SP flash tool.
- Close the SP flash tool on your computer and unplug your phone.
- Power on the phone and enjoy.
- After the flashing process starts, it might take up to 5–10 minutes. So keep patience and wait.
Follow Detailed Instruction Ulefone Be Pure Flashing With Sp Flash Tool.
