Ulefone Armor 17 Pro Firmware Flash File – Android 12 S

Ulefone Armor 17 Pro Firmware

Download Firmware / Flash File For Ulefone Armor 17 Pro:

If your Ulefone Armor 17 Pro phone is corrupt or bricked. Download Ulefone Armor 17 Pro stock firmware from here. To get it back to working condition again. 

All you have to do is simply download the below-given Ulefone Armor 17 Pro firmware files and tools on your PC. And then follow the given instruction to install the Stock ROM on Ulefone Armor 17 Pro using SP Flash Tool. This guide is also helpful to unroot. Or fix any software malfunctioning problem. 

There are various reasons to flash (Firmware on Ulefone Armor 17 Pro). 

For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.  If you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems and benefits that cause flashing stock ROM are below.

About Ulefone Armor 17 Pro:

The Ulefone Armor 17 Pro is a good-level Android smartphone, great for photos, which can satisfy even the most demanding of users. It has a huge 6.58 inches Touchscreen with a resolution of 2408×1080 pixels. As for the features of this Ulefone Armor 17 Pro, there’s really nothing missing. Starting with LTE 4G which allows data transfer and excellent internet browsing, in addition to Wi-Fi and GPS connectivity.

It also has a multimedia playerradiovideoconferencing, and Bluetooth. We emphasize the good internal memory of 256 GB with the possibility of expansion. The Ulefone Armor 17 Pro is a product with few competitors in terms of multimedia thanks to the 108-megapixel camera that allows the Ulefone Armor 17 Pro to take fantastic photos with a resolution of 12000×9000 pixels and record videos in high definition ( Full HD ) with a resolution of 2560×1440 pixels.

The Benefit Of Ulefone Armor 17 Pro Firmware:

  • Flash Stock ROM to unbrick
  • Update and downgrade
  • Unroot or fix bugs on the phone
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock to get your warranty
  • Keeps rebooting issue
  • If your phone boots straight into recovery
  • Phone boots straight into its bootloader

Firmware Information:

Device Name: Ulefone Armor 17 Pro
ROM Type: Full ROM
SoC: Mediatek
OS: Android 12
Password: Null
Root Access: No
Region: check below list
[quads id=2]
Download Links: GQ3100TF1_KSS1_Ulefone_20221027_V01 EU & GLO
  • Charge your mobile: Your phone may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.
  •  Take Full Backup

Before going to install stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

  • Download Ulefone Armor 17 Pro Flash Tool And Drivers:
  • A.  Download and install Ulefone Armor 17 Pro Drivers. The necessary communication between your device and PC.

These drivers are mainly for the devices powered by the MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

  • B. We use the Sp flash tool as Ulefone Armor 17 Pro Flash Tool because this tool is very efficient and support all kind of MTK phones.
Instructions to Flash Ulefone Armor 17 Pro Stock ROM:

1. First of all Download the ‘Ulefone Armor 17 Pro flash file zip‘ which is given above and extract it on your computer’s desktop. Also, download and extract the sp flash tool.

2. Then download the USB driver and set up it on your computer. In case you have already installed the USB driver on your computer skip this step.

3. Next, switch off your smartphone and take away the battery (if it is removable).

4. Now go to the sp flash tool extract folder and launch it.

5. As soon as the SP Flash tool is launched, click on the Download tab.

6. Now, click on the Scatter-loading button within the download tab.

7. Choose the scatter file from the firmware extract folder.

8. Now click on the Download button to start the flashing process.

9. Next, connect your phone to your computer using the USB cable (without battery – if the battery is removable) and press the volume up or volume down button at the same time.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.

As soon as it’s over, you will notice the Download OK green ring in SP Flash Tool.

Now, close the SP Flash tool and unplug your smartphone.

  • That’s it. Now you’ve successfully flashed stock ROM on your Ulefone Armor 17 Pro.

Follow Detailed Instruction To Flash Firmware With Sp Flash Tool.


  • Read and understand the Full Guide before flashing.”Ulefone Armor 17 Pro Firmware”.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of the information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of MTK phones, you will have a brick even if you download these blocks read from a phone which you own!

Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

About Asim

Always had a strong interest in the Android operating system. Experience with Git and self-hosted WordPress blogs led him to the understanding that an online presence was the logical next step for his business. It's about uniqueness and individuality!

Leave a Reply

Your email address will not be published. Required fields are marked *