[Touch Fix] SM-J701F Firmware 9.0 Pie Touch Not Working File

The Samsung SM-J701F smartphone finally received a touch Fix firmware to Android 9.0 Pie. The update will bring changes to the interface, new application icons, sounds, and notifications. Also, the Samsung SM-J701F touch fixes firmware contains new Android security patches.

[Touch Fix] Samsung SM-J701F Firmware 9.0 Pie Touch Not Working File

[Touch Fix] Samsung SM-J701F Firmware 9.0 Pie Touch Not Working File

In the changelog, among other things, several optimizations and improvements should increase the speed, stability, and smoothness of the system.

As usual, you can manually check for updates by going to the settings, selecting “About phone” and then “System update.”

Pre-requirements to Fix Samsung SM-J701F Touch Not Working

How To Backup Android Phone Before Ota Update

Download Samsung SM-J701F Firmware 9.0 Pie Touch Not Working File

J701F U6 Volte Fix Touch Not Work After V9 Pie.rar

[quads id=2]

How To Install Samsung SM-J701F Firmware [Tocuh Fix]

 1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the Samsung SM-J701F Android 9.0 Pie Firmware files on your computer. After extracting, you will be able to see the following files:

3: Now, Switch off your Smartphone.

4: After switching off the phone, you need to boot into Download Mode. To boot into download mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you will be able to see a Warning Yellow Triangle Sign. In this situation, you have to press the Volume Up key to continue.

6: Now, Download and open Odin Open (found in the extracted files, that you have downloaded in theStep#2) on your computer. Then connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show an “Added” message at the lower-left panel.

8: Once Odin detects your device, click on the PDA button and select the Samsung SM-J701F Firmware.tar file (you have downloaded this file in step#2).

9: Now, click on the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

The once Samsung SM-J701F Firmware process is completed you will be able to see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

11: Once you see, the Pass message in Odin, you can disconnect your Device from the computer.