Tinmo

 

Advertisement

This time I will share a tutorial on how to flash Tinmo F588 firmware file. With computers in an easy and tested way on our devices. In this article, you will find Tinmo F588 Stock Firmware ROM.

Official download link flashing tutorial and flash tool. Download Tinmo F588 stock ROM from here. Flash it in your device and enjoy the native Android experience again.

 

All the solution to your problems with your phone is currently available in this article. You just need some material like Tinmo F588 Stock ROM, USB drivers and flash tool that is in it.

How To Flash Tinmo F588 Firmware File [ROM]

For the ease of my readers, I have divided this method into different parts.

1. In the first section, we will talk about the Tinmo F588 Firmware (flash file) benefits and link it to download.

2. The other part is the necessary tools and pre-requirements to install the Tinmo F588 Firmware.

3. And in the last part, we will guide you How to flash this Tinmo F588 ROM file,

To perform this advance process of Flashing stock ROM please Go Step by step. If you got any error then leave a comment.

[quads id=2]

The Advantages Of Tinmo F588 Stock ROM:

A Soft Brick or a Software Brick, is usually just when you’re phone is stuck in a boot loop, and as the name implies, is caused by a software error on Android.

Usually the lack of a system to boot from or some other minor software bug that glitching boot.

They are easily fixable by flashing the Tinmo F588 stock ROM on Tinmo F588 through recovery or with SP Flash Tool.

If your Tinmo F588 device turns to a soft-brick, it may:

  • Keeps Rebooting;
  • Boots Straight Into Recovery;
  • Boots Straight Into its Bootloader;
  • Freeze at the startup screen or boot Animation;

Tinmo F588 Stock ROM Details:

Download Tinmo F588 Flash File:

Gapps File: Included
Device Supported: Tinmo F588
Tool Supported: SP Flash Tool
Processor: MediaTek MT6580
Os: Android 5.1 Lollipop
Download: Tinmo F588 MT6580 5.1.zip

[quads id=2]

Pre-requirements to Flash Tinmo F588 Stock Firmware File:

  • Supported Phone: Tinmo F588
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC.

1. Take Tinmo F588 Backup

Before going to install stock ROM you need to take all your messages, photos, and apps from your current smartphone. This requires a backup that you then restore on your device after flashing firmware.

How To Backup Android Phone Before Flashing Stock Firmware


2. Download Tinmo F588 Flash Tool And Drivers:

A.  Download and install Tinmo F588 Drivers. This is for basic communication between your device and PC.

These drivers are mainly for the devices powered by MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the Sp flash tool for as Tinmo F588 Flash Tool this procedure there are different reasons why we will use Sp Flash Tool to unbrick the Tinmo F588.

I believe this tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Tinmo F588.

Disclaimer:

  • Please read and understand the Full Guide Before Flashing Tinmo F588.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM Tinmo F588 must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own!

Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Flash Tinmo F588 Firmware File:

1. Download Tinmo F588 flash file zip file given above and extract it in your computer.

2. Download Tinmo F588 USB driver and set up it on your computer. In case if in case you have already put in USB driver in your computer skip this step.

3. Next, switch off your Tinmo F588 smartphone and take away the battery (it’s removable).

Switch Off Tinmo F588

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover the “Flash_tool.exe” file in it. Launch it.

Start SPFT For Tinmo F588 Firmware Flash

5. As soon as the SP Flash tool is launched, click on on “Download” tab.

How To Flash Tinmo F588 Firmware File [ROM] 1

6. Now, click on on “Scatter-loading” button within the download tab.

Tinmo F588 Firmware Scatter Loading

7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.

Select Tinmo F588 Firmware

8. Now click on on the “Download” button to start out the flashing process.

Press Download For Tinmo F588 Firmware

9. Next, join your Tinmo F588 Android device to your computer by means of the unique USB cable (without battery – whether it is battery removable) and press volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.

As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

Tinmo F588 Firmware Download Complete

11. Now, shut the SP Flash tool in your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed stock ROM firmware in your Tinmo F588 Android device.

Follow Detailed Instruction Tinmo F588 Firmware Flashing With Sp Flash Tool.