Download Tecno Pop 2 Pro B2 DA File [Secure Boot Auth]

Tecno Pop 2 Pro B2 DA File

Format A Single Partition using Tecno Pop 2 Pro B2 DA File. This is a step by step guide showing how to format a single partition of a Tecno Pop 2 Pro B2 with Secure Boot Download Agent loader File.

Why would I want to format a single partition on my Tecno Pop 2 Pro B2?

There are different causes why one might want to format a single partition on a Tecno Pop 2 Pro B2. One such example is when your device is FRP locked, all you need do is to format only FRP partition OR maybe you need to perform a factory reset but you are unable to boot into recovery mode for some weird unknown reasons.

All you need is to format user data and cache partitions. The method below will show how we can do this.

Requirements:

Tecno Pop 2 Pro B2 DA File Detail:

  • Device Supported: Tecno Pop 2 Pro B2
  • SOC: Media-Tek
  • Size: 1.1 MB
  • Password: Null
DownloadTecno Pop 2 Pro B2 DA – Auth File

How To Use Tecno Pop 2 Pro B2 DA And Auth Files:

The guide below explains how to format a single partition of a Tecno Pop 2 Pro B2 and fix software-related operations, like Flashing, FRP, IMEI & Unknown baseband fix, etc…

How to use Tecno Pop 2 Pro B2 DA File in SP Flash Tool

Step 1:

  • Launch the flash_tool.exe.

Launch the flash_tool.exe

Step 2:

  • Once the SP Flash is launched, click on the “Download tab.”

Download tab

Step 3:

  • Click on the “choose” button in front of the Download-Agent.

Download-Agent

Step 4:

  • Navigate to the location of the DA file, highlight it then click Open.

location of the DA file

Step 5:

  • The DA file should be loaded successfully.

Step 6:

  • You may now carry out whatever task you want (i.e Flashing, FRP Bypass, etc…), Don’t forget to load your scatter file.

How to use Tecno Pop 2 Pro B2 DA File in NCK Pro Box

Step 1:

  • Launch the NckBox AndroidMTK.exe or nckDongle_AndroidMTK.exe (for those using dongle).

NckBox AndroidMTK

Step 2:

  • Navigate to the Main tab and click on the “Select custom loader” button in front of the Custom DA Loader.

Select custom loader

Step 3:

  • Navigate to the location of the DA file, highlight it then click Open.

Step 4:

  • The DA file should be loaded successfully and the checkbox ticked automatically.

DA file should be loaded successfully

Step 5:

  • You may now carry out whatever task you want (i.e Flashing, Unlocking, FRP Bypass, IME Repair, etc…).

How to use Tecno Pop 2 Pro B2 DA File in Miracle Box

Step 1:

  • Launch the Miracle Box. Once the Miracle Box is launched, click on the “Custom Setting” tab.

Launch the Miracle Box

Step 2:

  • Click on the “DA File” button.

miracle-box-da-file-select-2

Step 3:

  • Navigate to the location of the DA file, highlight it then click Open.

Step 4:

  • The DA file should be loaded successfully. Now click on the checkbox to enable the DA file.

checkbox to enable the DA file

Step 5:

  • You may now switch to other tabs to carry out whatever task you want (i.e Flashing, Unlocking, FRP Bypass, IME Repair, etc…).

Disclaimer:

  • Please read and understand the Full Guide Before Flashing.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Some MTK Secure Boot DA files work only on specific tools.
  • You may rename the DA file to MTK_AllInOne_DA_SP.bin
  • The selection of DA files in Miracle Box is only available from v2.75 and above.

Check Also

Infinix X653C DA File

Infinix X653C DA File [Secure Boot Auth]

Format A Single Partition using Infinix X653C DA File. This is a step by step …

Leave a Reply

Your email address will not be published. Required fields are marked *