Download Tambo TA-1 Firmware. If you have Tambo TA-1 Smartphone. And You want to download the Stock ROM – Flash File For it. Then You are on the Correct Place, You have to do this by following the Below Guide.

Tambo TA-1 smartphone was launched in April 2018. The phone comes with a 4.50-inch touchscreen display with a resolution of 480×854 pixels.

Tambo TA-1 is powered by a 1.3GHz MediaTek MT6739 processor. It comes with 1GB of RAM.

The Tambo TA-1 runs Android Oreo (Go edition) and is powered by a 2,000mAh battery.

- Advertisement -

As far as the cameras are concerned, the Tambo TA-1 on the rear packs 5-megapixel camera. It sports a camera on the front for selfies.

Tambo TA-1 based on Android Oreo (Go edition) and packs 8GB of inbuilt storage that can be expanded via microSD card (up to 64GB). The Tambo TA-1 is a dual-SIM (GSM and GSM) smartphone.

Connectivity options on the Tambo TA-1 include Wi-Fi 802.11 b/g/n, GPS, Bluetooth v4.00, FM radio, 3G, and 4G. Sensors on the phone include an accelerometer.

The Tambo TA-1 measures 133.50 x 67.00 x 9.90mm (height x width x thickness) and weighs 134.00 grams. It was launched in Black, Red, Rose Gold, and Champagne colors.

Tambo TA-1 Firmware

If your Tambo TA-1 device is corrupt or bricked. Download Tambo TA-1 firmware from here. (based on your device model number) and flash it on your smartphone or tablet. To get it back to a working condition again. In this post, we share Tambo TA-1 official Flash file we test this ROM on many phones it,s work well. To download the official firmware of Tambo TA-1 and flash with any chines Mobiles flashing tool or box.

We will use The YGDP Tool to unbrick the Tambo TA-1. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Tambo TA-1.

The Benefit Of Tambo TA-1 Firmware:

  • Flash Stock To Unbrick your Tambo TA-1
  • Fix boot loop issue
  • Update and Downgrade Tambo TA-1
  • Unroot or Fix Bugs
  • To solve the lag or stutter on Tambo TA-1
  • Fix software issues.
  • Return to stock for warranty coverage.

Tambo TA-1 Firmware Details:

  • Gapps File: Included
  • Device Supported: Tambo TA-1
  • Tool Supported: YGDP Tool
Download
TA-1_Go_V11_Indian.rar

[quads id=2]

Pre-requirements to Install Stock Firmware on Tambo TA-1 :

  • Supported Phone: Tambo TA-1
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC.

Take Phone Backup:

Tambo TA-1 Flashing Tool And Drivers:

  • Download and install the Android USB Drivers.
  • Download YGDP Tool Start YGDP

Disclaimer:

  • Please Read and understand the Full Guide Before Flashing Tambo TA-1 Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Instructions to Install Firmware on Tambo TA-1 :

Follow Detailed Instruction Tambo TA-1 Stock Firmware Flashing With YGDP Tool.