Format A Single Partition using Infinix Hot 6 X606C DA File. This is a step by step guide showing how to format a single partition of a Infinix Hot 6 X606C using SP flash tool.
Why would I want to format a single partition on my Infinix Hot 6 X606C?
There are different causes why one might want to format a single partition on a Infinix Hot 6 X606C. One such example is when your device is FRP locked, all you need do is to format only FRP partition OR maybe you need to perform a factory reset but you are unable to boot into recovery mode for some weird unknown reasons.
All you need is to format user data and cache partitions. The method below will show how we can do this.
Requirements:
- Supported Phone: Infinix Hot 6 X606C.
- Charge your mobile: You may no less than a half charge.
- Laptop or PC: To execute this installation.
- Take Backup Contacts, Sms, Etc, Firmware, or NVRAM.
Infinix Hot 6 X606C DA File Detail:
- File Name: Infinix Hot 6 X606C.zip
- Tool Supported: Sp Flash Tool
- Size: 183.21KB
| Downlaod | DA Auth File |
How To Use Infinix Hot 6 X606C Da Auth File To Remove or Bypass Frp Lock.
Download the Sp Flash Tool and USB Drivers on your PC. Follow the below Guide to install DA file sing your favorite tool.
+ How To Use DA File in SP Flash Tool:
1. The steps below explain how to format a single partition of a using the SP flash tool.
2. Extract the content of the SP flash tool zip file and Launch SP flash tool.
3. Select the scatter file for your device by clicking choose besides the scatter-loading file’s dropdown bar.
4. In the windows that appear next, navigate to and select the Infinix Hot 6 X606C scatter file.
5. You should now be taken back to the SP flash tool window, click on the Format tab.
![Lenovo A6600 Plus A6600A40 Secure Boot DA File [Format Single Partition]](https://aiomobilestuff.com/wp-content/uploads/2019/04/Huawei-MYA-L03-Secure-Boot-DA-File-Format-Single-Partition-1.jpg "Lenovo A6600 Plus A6600A40 Secure Boot DA File [Format Single Partition]")
6. Tick the checkbox beside “Manual format flash”
7. Open windows explorer and navigate to the location of the scatter file you selected earlier on then open it using Notepad++
8. Scroll down the contents of the scatter file till you get to the partition you wish to format [in my case, I’m trying to format FRP partition]
9. Input the values of Linear_start addr and partition_size into SP flash tool then Click on Start
Code:Linear_start addr = Begin Address
partition_size = Format Length
10. Power off the phone (with the battery in) then connect to the PC via a USB cord. Once successful, you should get a green tick.
11. Now you can boot up your phone.
+ How To Use DA File in NCK Pro Box:
Step 1: Launch the NckBox AndroidMTK.exe or nckDongle_AndroidMTK.exe (for those using dongle).
Step 2: Navigate to the Main tab and click on the “Select custom loader” button in front of the Custom DA Loader.
Step 3: Navigate to the location of the DA file, highlight it then click Open.
Step 4: The DA file should be loaded successfully and the checkbox ticked automatically.
Step 5: You may now carry out whatever task you want (i.e Flashing, Unlocking, FRP Bypass, IME Repair, etc…).
+ How To Use DA File in Miracle Box:
Step 1: Launch the Miracle Box. Once the Miracle Box is launched, click on the “Custom Setting” tab.
Step 2: Click on the “DA File” button.
Step 3: Navigate to the location of the DA file, highlight it then click Open.
Step 4: The DA file should be loaded successfully. Now click on the checkbox to enable the DA file.
Step 5: You may now switch to other tabs to carry out whatever task you want (i.e Flashing, Unlocking, FRP Bypass, IME Repair, etc…).
Disclaimer:
- Once the SP flash tool has detected your device, avoid disconnecting till the task is complete as this might cause the Infinix Hot 6 X606C to go dead.
- If you accidentally selected “Autoformat – Format all”, your device will go dead and you’ll need to flash full Infinix Hot 6 X606C stock ROM to revive the phone.
- Avoid using a random Infinix Hot 6 X606C scatter file (even though its for your chipset) in the sp flash tool.
- Just because a scatter file is for your chipset doesn’t mean it contains the same partition info.
- Formatting with a wrong scatter file could result in more problems than you initially intended to fix.
- SP flash tool was created by MediaTek Inc. so credits to them for the tool.
Format A Single Partition using Lenovo TB-7304I DA File. This is a step by step guide showing how to format a single partition of a Lenovo TB-7304I with Secure Boot Download Agent loader File.Why would I want to format a single partition on my Lenovo TB-7304I?
There are different causes why one might want to format a single partition on a Lenovo TB-7304I. One such example is when your device is FRP locked, all you need do is to format only FRP partition OR maybe you need to perform a factory reset but you are unable to boot into recovery mode for some weird unknown reasons.
All you need is to format user data and cache partitions. The method below will show how we can do this.
Requirements:
- Laptop or PC: To execute this installation.
- Take Backup Contacts, Sms, Etc, Firmware, or NVRAM.
- Download the latest sp flash tool.
- Download And Install USB Drivers.
Lenovo TB-7304I DA File Detail:
- Device Suporrted: Lenovo TB-7304I
- SOC: Media-Tek
- Size: 1.1 MB
- Password: Null
Download Lenovo TB-7304I DA – Auth File How To Use Lenovo TB-7304I DA And Auth Files:
The guide below explain how to format a single partition of a Lenovo TB-7304I and fix software-related operations, like Flashing, FRP, IMEI & Unknown baseband fix, etc…
How to use DA File in SP Flash Tool
Step 1:
- Launch the flash_tool.exe.
Step 2:
- Once the SP Flash is launched, click on the “Download tab.”
Step 3:
- Click on the “choose” button in front of the Download-Agent.
Step 4:
- Navigate to the location of the DA file, highlight it then click Open.
Step 5:
- The DA file should be loaded successfully.
Step 6:
- You may now carry out whatever task you want (i.e Flashing, FRP Bypass, etc…), Don’t forget to load your scatter file.
How to use DA File in NCK Pro Box
Step 1:
- Launch the NckBox AndroidMTK.exe or nckDongle_AndroidMTK.exe (for those using dongle).
Step 2:
- Navigate to the Main tab and click on the “Select custom loader” button in front of the Custom DA Loader.
Step 3:
- Navigate to the location of the DA file, highlight it then click Open.
Step 4:
- The DA file should be loaded successfully and the checkbox ticked automatically.
Step 5:
- You may now carry out whatever task you want (i.e Flashing, Unlocking, FRP Bypass, IME Repair, etc…).
How to use DA File in Miracle Box
Step 1:
- Launch the Miracle Box. Once the Miracle Box is launched, click on the “Custom Setting” tab.
Step 2:
- Click on the “DA File” button.
Step 3:
- Navigate to the location of the DA file, highlight it then click Open.
Step 4:
- The DA file should be loaded successfully. Now click on the checkbox to enable the DA file.
Step 5:
- You may now switch to other tabs to carry out whatever task you want (i.e Flashing, Unlocking, FRP Bypass, IME Repair, etc…).
Disclaimer:
- Please read and understand the Full Guide Before Flashing.
- Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
- Some MTK Secure Boot DA files work only on specific tools.
- You may rename the DA file to MTK_AllInOne_DA_SP.bin
- The selection of DA files in Miracle Box is only available from v2.75 and above.
Format A Single Partition using Huawei JAT-LX1 DA File. This is a step by step guide showing how to format a single partition of a Huawei JAT-LX1 with Secure Boot Download Agent loader File.Why would I want to format a single partition on my Huawei JAT-LX1?
There are different causes why one might want to format a single partition on a Huawei JAT-LX1. One such example is when your device is FRP locked, all you need do is to format only FRP partition OR maybe you need to perform a factory reset but you are unable to boot into recovery mode for some weird unknown reasons.
All you need is to format user data and cache partitions. The method below will show how we can do this.
Requirements:
- Laptop or PC: To execute this installation.
- Take Backup Contacts, Sms, Etc, Firmware, or NVRAM.
- Download the latest sp flash tool.
- Download And Install USB Drivers.
Huawei JAT-LX1 DA File Detail:
- Device Supported: Huawei JAT-LX1
- SOC: Media-Tek
- Size: 1.1 MB
- Password: [GSM Tech Master][GSM Developers]
Download Huawei JAT-LX1 DA – Auth File How To Use Huawei JAT-LX1 DA And Auth Files:
The guide below explains how to format a single partition of a Huawei JAT-LX1 and fix software-related operations, like Flashing, FRP, IMEI & Unknown baseband fix, etc…
How to use DA File in SP Flash Tool
Step 1:
- Launch the flash_tool.exe.
Step 2:
- Once the SP Flash is launched, click on the “Download tab.”
Step 3:
- Click on the “choose” button in front of the Download-Agent.
Step 4:
- Navigate to the location of the DA file, highlight it then click Open.
Step 5:
- The DA file should be loaded successfully.
Step 6:
- You may now carry out whatever task you want (i.e Flashing, FRP Bypass, etc…), Don’t forget to load your scatter file.
How to use DA File in NCK Pro Box
Step 1:
- Launch the NckBox AndroidMTK.exe or nckDongle_AndroidMTK.exe (for those using dongle).
Step 2:
- Navigate to the Main tab and click on the “Select custom loader” button in front of the Custom DA Loader.
Step 3:
- Navigate to the location of the DA file, highlight it then click Open.
Step 4:
- The DA file should be loaded successfully and the checkbox ticked automatically.
Step 5:
- You may now carry out whatever task you want (i.e Flashing, Unlocking, FRP Bypass, IME Repair, etc…).
How to use DA File in Miracle Box
Step 1:
- Launch the Miracle Box. Once the Miracle Box is launched, click on the “Custom Setting” tab.
Step 2:
- Click on the “DA File” button.
Step 3:
- Navigate to the location of the DA file, highlight it then click Open.
Step 4:
- The DA file should be loaded successfully. Now click on the checkbox to enable the DA file.
Step 5:
- You may now switch to other tabs to carry out whatever task you want (i.e Flashing, Unlocking, FRP Bypass, IME Repair, etc…).
Disclaimer:
- Please read and understand the Full Guide Before Flashing.
- Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
- Some MTK Secure Boot DA files work only on specific tools.
- You may rename the DA file to MTK_AllInOne_DA_SP.bin
- The selection of DA files in Miracle Box is only available from v2.75 and above.
Format A Single Partition using Huawei AMN-L21 DA File. This is a step by step guide showing how to format a single partition of a Huawei AMN-L21 with Secure Boot Download Agent loader File.Why would I want to format a single partition on my Huawei AMN-L21?
There are different causes why one might want to format a single partition on a Huawei AMN-L21. One such example is when your device is FRP locked, all you need do is to format only FRP partition OR maybe you need to perform a factory reset but you are unable to boot into recovery mode for some weird unknown reasons.
All you need is to format user data and cache partitions. The method below will show how we can do this.
Requirements:
- Laptop or PC: To execute this installation.
- Take Backup Contacts, Sms, Etc, Firmware, or NVRAM.
- Download the latest sp flash tool.
- Download And Install USB Drivers.
Huawei AMN-L21 DA File Detail:
- Device Supported: Huawei AMN-L21
- SOC: Media-Tek
- Size: 1.1 MB
- Password: [GSM Tech Master][GSM Developers]
Download Huawei AMN-L21 DA – Auth File How To Use Huawei AMN-L21 DA And Auth Files:
The guide below explains how to format a single partition of a Huawei AMN-L21 and fix software-related operations, like Flashing, FRP, IMEI & Unknown baseband fix, etc…
How to use DA File in SP Flash Tool
Step 1:
- Launch the flash_tool.exe.
Step 2:
- Once the SP Flash is launched, click on the “Download tab.”
Step 3:
- Click on the “choose” button in front of the Download-Agent.
Step 4:
- Navigate to the location of the DA file, highlight it then click Open.
Step 5:
- The DA file should be loaded successfully.
Step 6:
- You may now carry out whatever task you want (i.e Flashing, FRP Bypass, etc…), Don’t forget to load your scatter file.
How to use DA File in NCK Pro Box
Step 1:
- Launch the NckBox AndroidMTK.exe or nckDongle_AndroidMTK.exe (for those using dongle).
Step 2:
- Navigate to the Main tab and click on the “Select custom loader” button in front of the Custom DA Loader.
Step 3:
- Navigate to the location of the DA file, highlight it then click Open.
Step 4:
- The DA file should be loaded successfully and the checkbox ticked automatically.
Step 5:
- You may now carry out whatever task you want (i.e Flashing, Unlocking, FRP Bypass, IME Repair, etc…).
How to use DA File in Miracle Box
Step 1:
- Launch the Miracle Box. Once the Miracle Box is launched, click on the “Custom Setting” tab.
Step 2:
- Click on the “DA File” button.
Step 3:
- Navigate to the location of the DA file, highlight it then click Open.
Step 4:
- The DA file should be loaded successfully. Now click on the checkbox to enable the DA file.
Step 5:
- You may now switch to other tabs to carry out whatever task you want (i.e Flashing, Unlocking, FRP Bypass, IME Repair, etc…).
Disclaimer:
- Please read and understand the Full Guide Before Flashing.
- Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
- Some MTK Secure Boot DA files work only on specific tools.
- You may rename the DA file to MTK_AllInOne_DA_SP.bin
- The selection of DA files in Miracle Box is only available from v2.75 and above.
Why would I want to format a single partition on my Tecno CD8?
There are different causes why one might want to format a single partition on a Tecno CD8. One such example is when your device is FRP locked, all you need do is to format only FRP partition OR maybe you need to perform a factory reset but you are unable to boot into recovery mode for some weird unknown reasons.
All you need is to format user data and cache partitions. The method below will show how we can do this.
Requirements:
- Laptop or PC: To execute this installation.
- Take Backup Contacts, Sms, Etc, Firmware, or NVRAM.
- Download the latest sp flash tool.
- Download And Install USB Drivers.
Tecno CD8 DA File Detail:
- Device Suporrted: Tecno CD8
- SOC: Media-Tek
- Size: 1.1 MB
- Password: Null
Download Tecno CD8 DA – Auth File How To Use Tecno CD8 DA And Auth Files:
The guide below explain how to format a single partition of a Tecno CD8 and fix software-related operations, like Flashing, FRP, IMEI & Unknown baseband fix, etc…
How to use DA File in SP Flash Tool
Step 1:
- Launch the flash_tool.exe.
Step 2:
- Once the SP Flash is launched, click on the “Download tab.”
Step 3:
- Click on the “choose” button in front of the Download-Agent.
Step 4:
- Navigate to the location of the DA file, highlight it then click Open.
Step 5:
- The DA file should be loaded successfully.
Step 6:
- You may now carry out whatever task you want (i.e Flashing, FRP Bypass, etc…), Don’t forget to load your scatter file.
How to use DA File in NCK Pro Box
Step 1:
- Launch the NckBox AndroidMTK.exe or nckDongle_AndroidMTK.exe (for those using dongle).
Step 2:
- Navigate to the Main tab and click on the “Select custom loader” button in front of the Custom DA Loader.
Step 3:
- Navigate to the location of the DA file, highlight it then click Open.
Step 4:
- The DA file should be loaded successfully and the checkbox ticked automatically.
Step 5:
- You may now carry out whatever task you want (i.e Flashing, Unlocking, FRP Bypass, IME Repair, etc…).
How to use DA File in Miracle Box
Step 1:
- Launch the Miracle Box. Once the Miracle Box is launched, click on the “Custom Setting” tab.
Step 2:
- Click on the “DA File” button.
Step 3:
- Navigate to the location of the DA file, highlight it then click Open.
Step 4:
- The DA file should be loaded successfully. Now click on the checkbox to enable the DA file.
Step 5:
- You may now switch to other tabs to carry out whatever task you want (i.e Flashing, Unlocking, FRP Bypass, IME Repair, etc…).
Disclaimer:
- Please read and understand the Full Guide Before Flashing.
- Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
- Some MTK Secure Boot DA files work only on specific tools.
- You may rename the DA file to MTK_AllInOne_DA_SP.bin
- The selection of DA files in Miracle Box is only available from v2.75 and above.
Why would I want to format a single partition on my Lenovo TB-7304X?
There are different causes why one might want to format a single partition on a Lenovo TB-7304X. One such example is when your device is FRP locked, all you need do is to format only FRP partition OR maybe you need to perform a factory reset but you are unable to boot into recovery mode for some weird unknown reasons.
All you need is to format user data and cache partitions. The method below will show how we can do this.
Requirements:
- Laptop or PC: To execute this installation.
- Take Backup Contacts, Sms, Etc, Firmware, or NVRAM.
- Download the latest sp flash tool.
- Download And Install USB Drivers.
Lenovo TB-7304X DA File Detail:
- Device Suporrted: Lenovo TB-7304X
- SOC: Media-Tek
- Size: 1.1 MB
- Password: Null
Download Lenovo TB-7304X DA – Auth File How To Use Lenovo TB-7304X DA And Auth Files:
The guide below explain how to format a single partition of a Lenovo TB-7304X and fix software-related operations, like Flashing, FRP, IMEI & Unknown baseband fix, etc…
How to use DA File in SP Flash Tool
Step 1:
- Launch the flash_tool.exe.
Step 2:
- Once the SP Flash is launched, click on the “Download tab.”
Step 3:
- Click on the “choose” button in front of the Download-Agent.
Step 4:
- Navigate to the location of the DA file, highlight it then click Open.
Step 5:
- The DA file should be loaded successfully.
Step 6:
- You may now carry out whatever task you want (i.e Flashing, FRP Bypass, etc…), Don’t forget to load your scatter file.
How to use DA File in NCK Pro Box
Step 1:
- Launch the NckBox AndroidMTK.exe or nckDongle_AndroidMTK.exe (for those using dongle).
Step 2:
- Navigate to the Main tab and click on the “Select custom loader” button in front of the Custom DA Loader.
Step 3:
- Navigate to the location of the DA file, highlight it then click Open.
Step 4:
- The DA file should be loaded successfully and the checkbox ticked automatically.
Step 5:
- You may now carry out whatever task you want (i.e Flashing, Unlocking, FRP Bypass, IME Repair, etc…).
How to use DA File in Miracle Box
Step 1:
- Launch the Miracle Box. Once the Miracle Box is launched, click on the “Custom Setting” tab.
Step 2:
- Click on the “DA File” button.
Step 3:
- Navigate to the location of the DA file, highlight it then click Open.
Step 4:
- The DA file should be loaded successfully. Now click on the checkbox to enable the DA file.
Step 5:
- You may now switch to other tabs to carry out whatever task you want (i.e Flashing, Unlocking, FRP Bypass, IME Repair, etc…).
Disclaimer:
- Please read and understand the Full Guide Before Flashing.
- Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
- Some MTK Secure Boot DA files work only on specific tools.
- You may rename the DA file to MTK_AllInOne_DA_SP.bin
- The selection of DA files in Miracle Box is only available from v2.75 and above.
Format A Single Partition using Wiko Lenny 4 DA File. This is a step by step guide showing how to format a single partition of a Wiko Lenny 4 with Secure Boot Download Agent loader File.Why would I want to format a single partition on my Wiko Lenny 4 S4 IX626B?
There are different causes why one might want to format a single partition on an Wiko Lenny 4. One such example is when your device is FRP locked, all you need do is to format only FRP partition OR maybe you need to perform a factory reset but you are unable to boot into recovery mode for some weird unknown reasons.
All you need is to format user data and cache partitions. The method below will show how we can do this.
Requirements:
- Laptop or PC: To execute this installation.
- Take Backup Contacts, Sms, Etc, Firmware, or NVRAM.
- Download the latest sp flash tool.
- Download And Install USB Drivers.
Wiko Lenny 4 DA File Detail:
- Device Suporrted: Wiko Lenny 4
- File Name: S4 IX626B Boot DA
- SOC: Media-Tek
- Size: 1.1 MB
- Password: Null
Download Wiko Lenny 4 DA – Auth File How To Use Wiko Lenny 4 S4 IX626B DA And Auth Files:
The guide below explain how to format a single partition of a Wiko Lenny 4 and fix software-related operations, like Flashing, FRP, IMEI & Unknown baseband fix, etc…
How to use DA File in SP Flash Tool
Step 1:
- Launch the flash_tool.exe.
Step 2:
- Once the SP Flash is launched, click on the “Download tab.”
Step 3:
- Click on the “choose” button in front of the Download-Agent.
Step 4:
- Navigate to the location of the DA file, highlight it then click Open.
Step 5:
- The DA file should be loaded successfully.
Step 6:
- You may now carry out whatever task you want (i.e Flashing, FRP Bypass, etc…), Don’t forget to load your scatter file.
How to use DA File in NCK Pro Box
Step 1:
- Launch the NckBox AndroidMTK.exe or nckDongle_AndroidMTK.exe (for those using dongle).
Step 2:
- Navigate to the Main tab and click on the “Select custom loader” button in front of the Custom DA Loader.
Step 3:
- Navigate to the location of the DA file, highlight it then click Open.
Step 4:
- The DA file should be loaded successfully and the checkbox ticked automatically.
Step 5:
- You may now carry out whatever task you want (i.e Flashing, Unlocking, FRP Bypass, IME Repair, etc…).
How to use DA File in Miracle Box
Step 1:
- Launch the Miracle Box. Once the Miracle Box is launched, click on the “Custom Setting” tab.
Step 2:
- Click on the “DA File” button.
Step 3:
- Navigate to the location of the DA file, highlight it then click Open.
Step 4:
- The DA file should be loaded successfully. Now click on the checkbox to enable the DA file.
Step 5:
- You may now switch to other tabs to carry out whatever task you want (i.e Flashing, Unlocking, FRP Bypass, IME Repair, etc…).
Disclaimer:
- Please read and understand the Full Guide Before Flashing.
- Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
- Some MTK Secure Boot DA files work only on specific tools.
- You may rename the DA file to MTK_AllInOne_DA_SP.bin
- The selection of DA files in Miracle Box is only available from v2.75 and above.
Format A Single Partition using Tecno KC2J DA File. This is a step by step guide showing how to format a single partition of a Tecno KC2J with Secure Boot Download Agent loader File.
Why would I want to format a single partition on my Tecno KC2J?
There are different causes why one might want to format a single partition on a Tecno KC2J. One such example is when your device is FRP locked, all you need do is to format only FRP partition OR maybe you need to perform a factory reset but you are unable to boot into recovery mode for some weird unknown reasons.
All you need is to format user data and cache partitions. The method below will show how we can do this.
Requirements:
- Laptop or PC: To execute this installation.
- Take Backup Contacts, Sms, Etc, Firmware, or NVRAM.
- Download the latest sp flash tool.
- Download And Install USB Drivers.
Tecno KC2J DA File Detail:
- Device Supported: Tecno KC2J
- SOC: Media-Tek
- Size: 1.1 MB
- Password: Null
Download Tecno KC2J DA – Auth File How To Use Tecno KC2J DA And Auth Files:
The guide below explains how to format a single partition of a Tecno KC2J and fix software-related operations, like Flashing, FRP, IMEI & Unknown baseband fix, etc…
How to use DA File in SP Flash Tool
Step 1:
- Launch the flash_tool.exe.
Step 2:
- Once the SP Flash is launched, click on the “Download tab.”
Step 3:
- Click on the “choose” button in front of the Download-Agent.
Step 4:
- Navigate to the location of the DA file, highlight it then click Open.
Step 5:
- The DA file should be loaded successfully.
Step 6:
- You may now carry out whatever task you want (i.e Flashing, FRP Bypass, etc…), Don’t forget to load your scatter file.
How to use DA File in NCK Pro Box
Step 1:
- Launch the NckBox AndroidMTK.exe or nckDongle_AndroidMTK.exe (for those using dongle).
Step 2:
- Navigate to the Main tab and click on the “Select custom loader” button in front of the Custom DA Loader.
Step 3:
- Navigate to the location of the DA file, highlight it then click Open.
Step 4:
- The DA file should be loaded successfully and the checkbox ticked automatically.
Step 5:
- You may now carry out whatever task you want (i.e Flashing, Unlocking, FRP Bypass, IME Repair, etc…).
How to use DA File in Miracle Box
Step 1:
- Launch the Miracle Box. Once the Miracle Box is launched, click on the “Custom Setting” tab.
Step 2:
- Click on the “DA File” button.
Step 3:
- Navigate to the location of the DA file, highlight it then click Open.
Step 4:
- The DA file should be loaded successfully. Now click on the checkbox to enable the DA file.
Step 5:
- You may now switch to other tabs to carry out whatever task you want (i.e Flashing, Unlocking, FRP Bypass, IME Repair, etc…).
Disclaimer:
- Please read and understand the Full Guide Before Flashing.
- Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
- Some MTK Secure Boot DA files work only on specific tools.
- You may rename the DA file to MTK_AllInOne_DA_SP.bin
- The selection of DA files in Miracle Box is only available from v2.75 and above.
Format A Single Partition using Tecno KC2 DA File. This is a step by step guide showing how to format a single partition of a Tecno KC2 with Secure Boot Download Agent loader File.Why would I want to format a single partition on my Tecno KC2?
There are different causes why one might want to format a single partition on a Tecno KC2. One such example is when your device is FRP locked, all you need do is to format only FRP partition OR maybe you need to perform a factory reset but you are unable to boot into recovery mode for some weird unknown reasons.
All you need is to format user data and cache partitions. The method below will show how we can do this.
Requirements:
- Laptop or PC: To execute this installation.
- Take Backup Contacts, Sms, Etc, Firmware, or NVRAM.
- Download the latest sp flash tool.
- Download And Install USB Drivers.
Tecno KC2 DA File Detail:
- Device Supported: Tecno KC2
- SOC: Media-Tek
- Size: 1.1 MB
- Password: Null
Download Tecno KC2 DA – Auth File How To Use Tecno KC2 DA And Auth Files:
The guide below explain how to format a single partition of a Tecno KC2 and fix software-related operations, like Flashing, FRP, IMEI & Unknown baseband fix, etc…
How to use DA File in SP Flash Tool
Step 1:
- Launch the flash_tool.exe.
Step 2:
- Once the SP Flash is launched, click on the “Download tab.”
Step 3:
- Click on the “choose” button in front of the Download-Agent.
Step 4:
- Navigate to the location of the DA file, highlight it then click Open.
Step 5:
- The DA file should be loaded successfully.
Step 6:
- You may now carry out whatever task you want (i.e Flashing, FRP Bypass, etc…), Don’t forget to load your scatter file.
How to use DA File in NCK Pro Box
Step 1:
- Launch the NckBox AndroidMTK.exe or nckDongle_AndroidMTK.exe (for those using dongle).
Step 2:
- Navigate to the Main tab and click on the “Select custom loader” button in front of the Custom DA Loader.
Step 3:
- Navigate to the location of the DA file, highlight it then click Open.
Step 4:
- The DA file should be loaded successfully and the checkbox ticked automatically.
Step 5:
- You may now carry out whatever task you want (i.e Flashing, Unlocking, FRP Bypass, IME Repair, etc…).
How to use DA File in Miracle Box
Step 1:
- Launch the Miracle Box. Once the Miracle Box is launched, click on the “Custom Setting” tab.
Step 2:
- Click on the “DA File” button.
Step 3:
- Navigate to the location of the DA file, highlight it then click Open.
Step 4:
- The DA file should be loaded successfully. Now click on the checkbox to enable the DA file.
Step 5:
- You may now switch to other tabs to carry out whatever task you want (i.e Flashing, Unlocking, FRP Bypass, IME Repair, etc…).
Disclaimer:
- Please read and understand the Full Guide Before Flashing.
- Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
- Some MTK Secure Boot DA files work only on specific tools.
- You may rename the DA file to MTK_AllInOne_DA_SP.bin
- The selection of DA files in Miracle Box is only available from v2.75 and above.
![Wiko Lenny 5 Secure Boot DA File [Format Single Partition]](/wp-content/uploads/2020/03/imgcache/Wiko-Lenny-5-Secure-Boot-DA-File_lqip.jpg "Wiko Lenny 5 Secure Boot DA File [Format Single Partition]")
Format A Single Partition using Wiko Lenny 5 DA File. This is a step by step guide showing how to format a single partition of a Wiko Lenny 5 with Secure Boot Download Agent loader File.Why would I want to format a single partition on my Wiko Lenny 5?
There are different causes why one might want to format a single partition on a Wiko Lenny 5. One such example is when your device is FRP locked, all you need do is to format only FRP partition OR maybe you need to perform a factory reset but you are unable to boot into recovery mode for some weird unknown reasons.
All you need is to format user data and cache partitions. The method below will show how we can do this.
Requirements:
- Laptop or PC: To execute this installation.
- Take Backup Contacts, Sms, Etc, Firmware, or NVRAM.
- Download the latest sp flash tool.
- Download And Install USB Drivers.
Wiko Lenny 5 DA File Detail:
- Device Supported: Wiko Lenny 5
- SOC: Media-Tek
- Size: 1.1 MB
- Password: Null
Download Wiko Lenny 5 DA – Auth File How To Use Wiko Lenny 5 DA And Auth Files:
The guide below explains how to format a single partition of a Wiko Lenny 5 and fix software-related operations, like Flashing, FRP, IMEI & Unknown baseband fix, etc…
How to use DA File in SP Flash Tool
Step 1:
- Launch the flash_tool.exe.
Step 2:
- Once the SP Flash is launched, click on the “Download tab.”
Step 3:
- Click on the “choose” button in front of the Download-Agent.
Step 4:
- Navigate to the location of the DA file, highlight it then click Open.
Step 5:
- The DA file should be loaded successfully.
Step 6:
- You may now carry out whatever task you want (i.e Flashing, FRP Bypass, etc…), Don’t forget to load your scatter file.
How to use DA File in NCK Pro Box
Step 1:
- Launch the NckBox AndroidMTK.exe or nckDongle_AndroidMTK.exe (for those using dongle).
Step 2:
- Navigate to the Main tab and click on the “Select custom loader” button in front of the Custom DA Loader.
Step 3:
- Navigate to the location of the DA file, highlight it then click Open.
Step 4:
- The DA file should be loaded successfully and the checkbox ticked automatically.
Step 5:
- You may now carry out whatever task you want (i.e Flashing, Unlocking, FRP Bypass, IME Repair, etc…).
How to use DA File in Miracle Box
Step 1:
- Launch the Miracle Box. Once the Miracle Box is launched, click on the “Custom Setting” tab.
Step 2:
- Click on the “DA File” button.
Step 3:
- Navigate to the location of the DA file, highlight it then click Open.
Step 4:
- The DA file should be loaded successfully. Now click on the checkbox to enable the DA file.
Step 5:
- You may now switch to other tabs to carry out whatever task you want (i.e Flashing, Unlocking, FRP Bypass, IME Repair, etc…).
Disclaimer:
- Please read and understand the Full Guide Before Flashing.
- Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
- Some MTK Secure Boot DA files work only on specific tools.
- You may rename the DA file to MTK_AllInOne_DA_SP.bin
- The selection of DA files in Miracle Box is only available from v2.75 and above.
