Galaxy S20 FE Exynos SM-G780F/DS Binary 14 Firmware
Ensure your Galaxy S20 FE Exynos SM-G780F/DS stays secure and up-to-date by downloading the latest firmware package G780FXXSEFWLC. This update, inclusive of the February 1, 2024 Security Patch Level, is crucial for bypassing FRP lock, reverting from root access, and returning to the original firmware. Keep your device safe with this essential download.
Samsung Galaxy S20 FE Exynos SM-G780F/DS Binary 14 Android 13 Brazil ZTO G780FXXSEFWLC
Model / Device | SM-G780F Binary 14 U14, S14, Bit 14 |
Region / Country | Brazil |
Language | Multi-Language |
Android Version | Android 13 T |
Operator / Carrier | Clean ZTO (without logo, operator apps) |
AP/PDA | G780FXXSEFWLC |
CSC | G780FOWOEFWK8 |
Modem CP Version / Baseband | G780FXXSEFWK8 |
Product code | ZTO |
Model References | SM-G780FZGKZTO, SM-G780FZBKZTO, SM-G780FLVKZTO |
Build / Release Date | 2024-01-17 |
Security Patch Level | 2024-01-01 (January 1, 2024) |
Size | 6.1GB |
Download | Google Drive |
Downgrade Firmware For Galaxy S20 FE Exynos SM-G780F/DS:
- Galaxy S20 FE Exynos SM-G780F/DS U13 Firmware
- Galaxy S20 FE Exynos SM-G780F/DS U12 Firmware
- Galaxy S20 FE Exynos SM-G780F/DS U11 Firmware
- Galaxy S20 FE Exynos SM-G780F/DS U10 Firmware
Pre-requirements:
- Compatible Device: Galaxy S20 FE Exynos SM-G780F/DS
- Charging: Ensure your mobile is charged to at least 50%.
- Computer: A PC or laptop is necessary to perform this installation.
- Backing Up Your Android Phone: here
- Samsung USB Driver: Samsung’s developer site.
- Download Odin:
How To Install Stock Firmware:
-
- Download the Galaxy S20 FE Exynos SM-G780F/DS Firmware files, then extract them on your computer.
- Turn off your smartphone completely.
- Press and hold the Volume Down, Home, and Power buttons simultaneously for 5-8 seconds until download mode is active. For a new phone, use this guide.
- In Download Mode, a warning sign with a yellow triangle will appear. Press the Volume Up button to continue.
- Open Odin on your PC and connect your smartphone via USB.
- Odin will display “Added” in the lower-left corner once the device is successfully connected.
- Select the Firmware.tar file by clicking on the PDA button in Odin.
- Press the Start button in Odin to initiate the firmware flashing process.
- The flashing process should be completed within 30-50 seconds.
To verify the installed firmware, navigate to Settings, select About Phone, then Software Information. Locate the firmware number listed as “Baseband version.”