Tag

HUAWEI Y3 2017

Browsing

Huawei CRO-L22 Firmware

In this article, you will learn  How you can install Huawei CRO-L22 Firmware. So if you are in this article, then either your phone is working correctly. You might have tried to root it. However, if you do not like the custom ROMs you have installed and want to go back to the original operating system.

Anyway, all the solution to your problems with your phone is currently available in this article. You just need some material like Huawei CRO-L22 Stock ROM, USB drivers, and flash tool that is in it.

Huawei CRO-L22 Stock ROM – How To Flash Guide

The Advantages Of Stock ROM:

A Soft Brick or a Software Brick, is usually just when you’re Phone is stuck in a boot loop, and as the name implies, is caused by a software error. Usually the lack of a system to boot from or some other minor software bug that glitching boot.

They are easily fixable by flashing the stock ROM through recovery or with SP Flash Tool.

If your Huawei CRO-L22 device turns to a soft-brick, it may:

  • Keeps Rebooting;
  • Boots Straight Into Recovery;
  • Boots Straight Into its Bootloader;
  • Freeze at the startup screen or boot Animation;

Pre-requirements:

Huawei CRO-L22 Firmware Details:

  • Device Name: Huawei CRO-L22
  • Type: Full ROM
  • SoC: Mediatek MT6761
  • Os: Android 10
  • Password: Null
  • Root access: Not
  • Gapps: Included
  • Firmware Version: Cairo-L22_C10B101
Download Firmware/Flash File

Instructions to Install Huawei CRO-L22 Firmware:

Download the Sp Flash Tool and USB Drivers on your PC. Follow the below Guide to install the firmware using the Sp Flash tool.

Guide to Install Stock ROM using Sp Flash Tool:

Download the Huawei CRO-L22 stock ROM zip file given above and extract it on your computer.

2. Download the USB driver and set up it on your computer. In case if in case you have already put in a USB driver in your computer skip this step.

3. Next, switch off your smartphone and take away the battery (it’s removable).

Switch Off

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover the “Flash_tool.exe” file in it. Launch it.

Start SPFT For Firmware Flash

5. As soon as the SP Flash tool is launched, click on on “Download” tab.

How To Flash ROM

6. Now, click on on “Scatter-loading” button within the download tab.

7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.

8. Now click on on the “Download” button to start the flashing process.

Press Download

9. Next, join your Android device to your computer using the unique USB cable (without battery – whether it is battery removable) and press the volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.

As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

11. Now, shut the SP Flash tool in your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed stock ROM firmware in your Android device.

Follow Detailed Instruction Stock Firmware Flashing With Sp Flash Tool.

Disclaimer:

  • Please read and understand the Full Guide Before Flashing.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own!

Always remove from them marks in SPFT! ALWAYS have a working backup of your Huawei CRO-L22 Firmware before you flash a new unknown ROM.

Format A Single Partition In Huawei Y3 2017 CRO U00 using Huawei Y3 2017 CRO U00 DA File. This is a step by step guide showing how to format a single partition of a Huawei Y3 2017 CRO U00 using SP flash tool.

CRO U00 Secure Boot DA File

Why would I want to format a single partition on my Huawei Y3 2017 CRO U00?

There are different causes why one might want to format a single partition on a Huawei cro-u00 auth file.

One such example is when your device is FRP locked, all you need do is to format only FRP partition OR maybe you need to perform a factory reset but you are unable to boot into recovery mode for some weird unknown reasons, all you need is to format user data and cache partitions.

The method below will show how we can do this.

Requirements to Flash Huawei CRO U00 Secure Boot File:

  • Supported Phone: Huawei Y3 2017 CRO U00
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Huawei Y3 2017 CRO U00 Backup:

Download Huawei Y3 2017 CRO U00 Flashing Tool And Drivers:

Huawei Y3 2017 CRO U00 Secure Boot DA File Detail:

  • File Name: DA_SWSEC.Huawei_MYA-L03 .7z
  • Device Supported: Huawei Y3 2017 CRO U00
  • Tool Supported: Sp Flash Tool [Huawei Cro-u00 flash tool]

Download

CRO_U00_Boot .zip

How to Format a Single Partition of Huawei Y3 2017 CRO U00:

1. The steps below explain how to format a single partition of a Huawei cro-u00 boot file using SP flash tool.

2. Extract the content of the SP flash tool zip file and Launch SP flash tool.

Launch Sp Flash Tool to Format a Single Partition of Huawei Y3 2017 CRO U00

3. Select the scatter file for your device by clicking choose besides the scatter-loading file’s dropdown bar.

Select scatter to Format a Single Partition of Huawei Y3 2017 CRO U00

4. In the windows that appear next, navigate to and select the Huawei Y3 2017 CRO U00 scatter file.

select the Huawei Y3 2017 CRO U00 scatter file

5. You should now be taken back to the SP flash tool window, Click on the Format tab.

Huawei Y3 2017 CRO U00 Secure Boot DA File [Format Single Partition]

6. Tick the checkbox beside “Manual format flash”

Huawei Y3 2017 CRO U00 Manual format flash

7. Open windows explorer and navigate to the location of the scatter file you selected earlier on then open it using Notepad++

8. Scroll down the contents of the scatter file till you get to the partition you wish to format [in my case, I’m trying to format FRP partition]

Huawei Y3 2017 CRO U00 format FRP partition

9. Input the values of Linear_start addr and partition_size into SP flash tool then Click on Start

Code:

Linear_start addr = Begin Address
partition_size    = Format Length

Huawei Y3 2017 CRO U00 addr and partition_size

10. Power off the phone (with the battery in) then connect to the PC via a USB cord. Once successful, you should get a green tick.

11. Now you can boot up the Huawei Y3 2017 CRO U00.

Disclaimer:

  • Once SP flash tool has detected your device, avoid disconnecting till the task is complete as this might cause the Huawei Y3 2017 CRO U00 to go dead.
  • If you accidentally selected “Autoformat – Format all”, your device will go dead and you’ll need to flash full Huawei Y3 2017 CRO U00 firmware to revive the phone.
  • Avoid using a random Huawei Y3 2017 CRO U00 scatter file (even though its for your chipset) in Sp flash tool. Just because a scatter file is for your chipset doesn’t mean it contains the same partition info. Formatting with a wrong scatter file could result in more problems than you initially intended to fix.
  • SP flash tool was created by MediaTek Inc. so credits to them for the tool.

Y3 2017 CRO L22 Secure Boot DA File

Format A Single Partition In Huawei Y3 2017 CRO L22 using Huawei Y3 2017 CRO L22 Secure Boot DA File. This is a step by step guide showing how to format a single partition of a Huawei Y3 2017 CRO L22 using SP flash tool with Huawei CRO l22 scatter file. You can also use as unlock Huawei CRO-l22 FRP cm2 boot file.

Why would I want to format a single partition on my Huawei Y3 2017 CRO L22?

There are different causes why one might want to format a single partition on a Huawei Y3 2017 CRO L22. One such example is when your Huawei CRO-l22 FRP locked, all you need do is to format only FRP partition OR maybe you need to perform a factory reset but you are unable to boot into recovery mode for some weird unknown reasons, all you need is to format user data and cache partitions. The method below will show how we can do this.

Requirements to format one single partition on my Huawei Y3 2017 CRO L22:

  • Supported Phone: Huawei Y3 2017 CRO L22
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Huawei Y3 2017 CRO L22 Backup:

Download Huawei Y3 2017 CRO L22 Flashing Tool And Drivers:

Huawei Y3 2017 CRO L22 DA File Detail:

  • File Name: DA_SWSEC.Huawei_MYA-L03 .7z
  • Device Supported: Huawei Y3 2017 CRO L22
  • Tool Supported: Sp Flash Tool

Download

CRO_L22_boot .zip

How to Format a Single Partition of Huawei Y3 2017 CRO L22:

1. The steps below explain how to format a single partition of a Huawei Y3 2017 CRO L22 using SP flash tool.

2. Extract the content of the SP flash tool zip file and Launch SP flash tool.

Launch Sp Flash Tool to Format a Single Partition of Huawei Y3 2017 CRO L22

3. Select the scatter file for your device by clicking choose besides the scatter-loading file’s dropdown bar.

Select scatter to Format a Single Partition of Huawei Y3 2017 CRO L22

4. In the windows that appear next, navigate to and select the Huawei Y3 2017 CRO L22 scatter file.

select the Huawei Y3 2017 CRO L22 scatter file

5. You should now be taken back to the SP flash tool window, Click on the Format tab.

Huawei Y3 2017 CRO L22 Secure Boot DA File [Format Single Partition]

6. Tick the checkbox beside “Manual format flash”

Huawei Y3 2017 CRO L22 Manual format flash

7. Open windows explorer and navigate to the location of the scatter file you selected earlier on then open it using Notepad++

8. Scroll down the contents of the scatter file till you get to the partition you wish to format [in my case, I’m trying to format FRP partition]

Huawei Y3 2017 CRO L22 format FRP partition

9. Input the values of Linear_start addr and partition_size into SP flash tool then Click on Start

Code:

Linear_start addr = Begin Address
partition_size    = Format Length

Huawei Y3 2017 CRO L22 addr and partition_size

10. Power off the phone (with the battery in) then connect to the PC via a USB cord. Once successful, you should get a green tick.

11. Now you can boot up the Huawei Y3 2017 CRO L22.

Disclaimer:

  • Once SP flash tool has detected your device, avoid disconnecting till the task is complete as this might cause the Huawei Y3 2017 CRO L22 to go dead.
  • If you accidentally selected “Autoformat – Format all”, your device will go dead and you’ll need to flash full Huawei Y3 2017 CRO L22 stock ROM to revive the phone.
  • Avoid using a random Huawei Y3 2017 CRO L22 scatter file (even though its for your chipset) in Sp flash tool. Just because a scatter file is for your chipset doesn’t mean it contains the same partition info. Formatting with a wrong scatter file could result in more problems than you initially intended to fix.
  • SP flash tool was created by MediaTek Inc. so credits to them for the tool.

Format A Single Partition In Huawei Y3 2017 CRO L03 using Huawei Y3 2017 CRO L03 Secure Boot DA File. This is a step by step guide showing how to format a single partition of a Huawei Y3 2017 CRO L03 using SP flash tool.

CRO L03 Secure Boot DA File

Why would I want to format a single partition on my Huawei Y3 2017 CRO L03?

There are different causes why one might want to format a single partition on a Huawei Y3 2017 CRO L03. One such example is when your device is FRP locked, all you need do is to format only FRP partition OR maybe you need to perform a factory reset but you are unable to boot into recovery mode for some weird unknown reasons, all you need is to format user data and cache partitions. The method below will show how we can do this.

Requirements to format one single partition on my Huawei Y3 2017 CRO L03:

  • Supported Phone: Huawei Y3 2017 CRO L03
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Huawei Y3 2017 CRO L03 Backup:

Download Huawei Y3 2017 CRO L03 Flashing Tool And Drivers:

Huawei Y3 2017 CRO L03 Secure Boot DA File Detail:

  • File Name: DA_SWSEC.Huawei_MYA-L03 .7z
  • Device Supported: Huawei Y3 2017 CRO L03
  • Tool Supported: Sp Flash Tool

Download

CRO_L03_Boot .zip

How to Format a Single Partition of Huawei Y3 2017 CRO L03:

1. The steps below explain how to format a single partition of a Huawei Y3 2017 CRO L03 using SP flash tool.

2. Extract the content of the SP flash tool zip file and Launch SP flash tool.

Launch Sp Flash Tool to Format a Single Partition of Huawei Y3 2017 CRO L03

3. Select the scatter file for your device by clicking choose besides the scatter-loading file’s dropdown bar.

Select scatter to Format a Single Partition of Huawei Y3 2017 CRO L03

4. In the windows that appear next, navigate to and select the Huawei Y3 2017 CRO L03 scatter file.

select the Huawei Y3 2017 CRO L03 scatter file

5. You should now be taken back to the SP flash tool window, Click on the Format tab.

Huawei Y3 2017 CRO L03 Secure Boot DA File [Format Single Partition]

6. Tick the checkbox beside “Manual format flash”

Huawei Y3 2017 CRO L03 Manual format flash

7. Open windows explorer and navigate to the location of the scatter file you selected earlier on then open it using Notepad++

8. Scroll down the contents of the scatter file till you get to the partition you wish to format [in my case, I’m trying to format FRP partition]

Huawei Y3 2017 CRO L03 format FRP partition

9. Input the values of Linear_start addr and partition_size into SP flash tool then Click on Start

Code:

Linear_start addr = Begin Address
partition_size    = Format Length

Huawei Y3 2017 CRO L03 addr and partition_size

10. Power off the phone (with the battery in) then connect to the PC via a USB cord. Once successful, you should get a green tick.

11. Now you can boot up the Huawei Y3 2017 CRO L03.

Disclaimer:

  • Once SP flash tool has detected your device, avoid disconnecting till the task is complete as this might cause the Huawei Y3 2017 CRO L03 to go dead.
  • If you accidentally selected “Autoformat – Format all”, your device will go dead and you’ll need to flash full Huawei Y3 2017 CRO L03 stock ROM to revive the phone.
  • Avoid using a random Huawei Y3 2017 CRO L03 scatter file (even though its for your chipset) in Sp flash tool. Just because a scatter file is for your chipset doesn’t mean it contains the same partition info. Formatting with a wrong scatter file could result in more problems than you initially intended to fix.
  • SP flash tool was created by MediaTek Inc. so credits to them for the tool.

Format A Single Partition In HUAWEI Y3 2017 CRO L02 using HUAWEI Y3 2017 CRO L02 Secure Boot DA File. This is a step by step guide showing how to format a single partition of a HUAWEI Y3 2017 CRO L02 using SP flash tool.

CRO L02 Secure Boot DA File

Why would I want to format a single partition on my HUAWEI Y3 2017 CRO L02?

There are different causes why one might want to format a single partition on a HUAWEI Y3 2017 CRO L02. One such example is when your device is FRP locked, all you need do is to format only FRP partition OR maybe you need to perform a factory reset but you are unable to boot into recovery mode for some weird unknown reasons, all you need is to format user data and cache partitions. The method below will show how we can do this.

Requirements to format one single partition on my HUAWEI Y3 2017 CRO L02:

  • Supported Phone: HUAWEI Y3 2017 CRO L02
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take HUAWEI Y3 2017 CRO L02 Backup:

Download HUAWEI Y3 2017 CRO L02 Flashing Tool And Drivers:

HUAWEI Y3 2017 CRO L02 Secure Boot DA File Detail:

  • File Name: DA_SWSEC.Huawei_MYA-L03 .7z
  • Device Supported: HUAWEI Y3 2017 CRO L02
  • Tool Supported: Sp Flash Tool

Download

CRO_L02_Boot .zip

How to Format a Single Partition of HUAWEI Y3 2017 CRO L02:

1. The steps below explain how to format a single partition of a HUAWEI Y3 2017 CRO L02 using SP flash tool.

2. Extract the content of the SP flash tool zip file and Launch SP flash tool.

Launch Sp Flash Tool to Format a Single Partition of HUAWEI Y3 2017 CRO L02

3. Select the scatter file for your device by clicking choose besides the scatter-loading file’s dropdown bar.

Select scatter to Format a Single Partition of HUAWEI Y3 2017 CRO L02

4. In the windows that appear next, navigate to and select the HUAWEI Y3 2017 CRO L02 scatter file.

select the HUAWEI Y3 2017 CRO L02 scatter file

5. You should now be taken back to the SP flash tool window, Click on the Format tab.

HUAWEI Y3 2017 CRO L02 Secure Boot DA File [Format Single Partition]

6. Tick the checkbox beside “Manual format flash”

HUAWEI Y3 2017 CRO L02 Manual format flash

7. Open windows explorer and navigate to the location of the scatter file you selected earlier on then open it using Notepad++

8. Scroll down the contents of the scatter file till you get to the partition you wish to format [in my case, I’m trying to format FRP partition]

HUAWEI Y3 2017 CRO L02 format FRP partition

9. Input the values of Linear_start addr and partition_size into SP flash tool then Click on Start

Code:

Linear_start addr = Begin Address
partition_size    = Format Length

HUAWEI Y3 2017 CRO L02 addr and partition_size

10. Power off the phone (with the battery in) then connect to the PC via a USB cord. Once successful, you should get a green tick.

11. Now you can boot up the HUAWEI Y3 2017 CRO L02.

Disclaimer:

  • Once SP flash tool has detected your device, avoid disconnecting till the task is complete as this might cause the HUAWEI Y3 2017 CRO L02 to go dead.
  • If you accidentally selected “Autoformat – Format all”, your device will go dead and you’ll need to flash full HUAWEI Y3 2017 CRO L02 stock ROM to revive the phone.
  • Avoid using a random HUAWEI Y3 2017 CRO L02 scatter file (even though its for your chipset) in Sp flash tool. Just because a scatter file is for your chipset doesn’t mean it contains the same partition info. Formatting with a wrong scatter file could result in more problems than you initially intended to fix.
  • SP flash tool was created by MediaTek Inc. so credits to them for the tool.

Huawei Y3 2017 CRO-U00

If you’re looking for the Huawei Y3 2017 CRO-U00 firmware you need to flash, it can sometimes be difficult to locate online For Huawei Y3 2017 CRO-U00.  In this Article/Tutorial about Unbrick Huawei Y3 2017 CRO-U00. and download flash files tested and working file. I have explained the method which is used by People or the Repairing Shops. I hope This Tutorial Will Help You To Unbrick Huawei Y3 2017 CRO-U00 Mediatek Based Devices.

All you have to do is simply download the below-given Huawei Y3 2017 CRO-U00 firmware files and tools on your PC. And then follow the given instruction to install the Stock ROM on Y3 2017 CRO-U00 using SP Flash Tool. This guide is also helpful to unroot. Or fix any software malfunctioning problem. 

How To Flash Huawei Y3 2017 CRO-U00 Stock ROM:

There are various reasons to flash (Firmware on Y3 2017 CRO-U00).

For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.  If you’re going to hard reset your phone and cannot access the recovery menu. But most of the problems and benefits that cause flashing stock ROM are below.

The Benefit Of Firmware:

  • Flash Stock ROM to unbrick
  • Update and downgrade
  • Unroot or fix bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty
  • Keeps rebooting issue
  • If your phone boots straight into recovery
  • Phone boots straight into its bootloader

Requirements To Flash Huawei Y3 2017 CRO-U00 Stock ROM:

  • Charge your mobile: Your phone may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

 Take Full Backup

Before going to install stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

Download Huawei Y3 2017 CRO-U00 Flash Tool And Drivers:

A.  Download and install Huawei Y3 2017 CRO-U00 Drivers. The necessary communication between your device and PC.

These drivers are mainly for the devices powered by MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the Sp flash tool for as Huawei Y3 2017 CRO-U00 Flash Tool because of this tool is very efficient and support all kind of MTK phones.

Instructions to Flash Huawei Y3 2017 CRO-U00 Stock ROM:

1. First of all Download the ‘Huawei-Y3_2017_CRO-U00_MT6580_180122_6.0 flash file zip‘ which is given above and extract it on your computer’s desktop. Also, download and extract the sp flash tool.

2. Then download the USB driver and set up it on your computer. In case you have already installed the USB driver on your computer skip this step.

3. Next, switch off your smartphone and take away the battery (if it is removable).

4. Now go to the sp flash tool extract folder and launch it.

5. As soon as the SP Flash tool is launch, click on the Download tab.

6. Now, click on the Scatter-loading button within the download tab.

7. Choose the scatter file from the firmware extract folder.

8. Now click on the Download button to start the flashing process.

9. Next, connect your phone to your computer using the USB cable (without battery – if the battery is removable) and press volume up or volume down button at the same time.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.

As soon as it’s over, you will notice the Download OK green ring in SP Flash Tool.

Now, close the SP Flash tool and unplug your smartphone.

That’s it. Now you’ve successfully flashed stock ROM on your Huawei Y3 2017 CRO-U00.

Follow Detailed Instruction To Flash Firmware With Sp Flash Tool.

Disclaimer:

  • Please read and understand the Full Guide before flashing “Huawei Y3 2017 CRO-U00 Firmware”.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of MTK phones, you will have a brick even if you download these blocks read from a phone which you own!

Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Huawei Y3 2017 CRO-U00 Firmware:

Disadvantage

Gapps: Included No Root
Device Supported: Huawei Y3 2017 CRO-U00 No Twrp And Nand Backup
Tool Supported: SP Flash Tool No Customization And Over cloaking
Soc: MediaTek MT6580 No ADB Ad Block
Os: Android 6.0 Pre-installed OEM apps
Get Link

Huawei Y3 2017

 

The specific Huawei Y3 2017 Stock Firmware Download Package comes with a Stock ROM of Huawei Y3 2017. This helps you to bypass FRP lock and revert form root and custom ROM.

Why would you want to flash Firmware on your Huawei Y3 2017?

There are various reasons to flash “Stock Firmware on Huawei Y3 2017”. For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.

If you’re going to hard reset your phone and you cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Benefit Of Huawei Y3 2017 Firmware:

  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade Huawei Y3 2017
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter on Huawei Y3 2017
  • By flashing Stock ROM, you can fix software issues.
  • Revert back to stock to get your warranty.

Huawei Y3 2017 Firmware Details:

  • Gapps File: Included
  • Device Supported: Huawei Y3 2017
  • Root: Not Rooted

Download:

Pre-requirements to Install Huawei Y3 2017 Stock ROM:

  • Supported Phone: Huawei Y3 2017
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Full Backup

Before going to install stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

Download Huawei Y3 2017 Flash Tool And Drivers:

A.  Download and install Huawei Y3 2017 Drivers. The necessary communication between your device and PC.

These drivers are mainly for the devices powered by LG. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the Huawei Smartphone Multi Download Software for as Huawei Y3 2017 Flash Tool because of this tool is very efficient and support all kind of LG phones.

Instructions to Flash Huawei Y3 2017 Stock ROM:

1: Extract the Huawei Smartphone Multi Download Software on your computer.

2: Now, Download and install the Handset ProductLine DriverHandset DriverQualcomm Driver, and Visual C Plus Software on your Computer. Alternatively, you can also find the link of all 4 Drivers in the Tool folder aswell.

3: Now, Open QPBLFBML01.exe to Launch the Huawei Multi Download Tool.

4: Once, Huawei Multi Download Software is launched, you will be able to see the following screen.

Huawei Honor 5X KIW-L22 Stock ROM

5: Now, Click on the Browse Button.

6: Now, it will ask you to set up the password. Just Leave the Password column blank and click on the Set Button.

7: Now, Locate the .xml file from the Stock firmware’ folder.

8: Now, Click on the Next Button.

9: Connect your Device to the Computer (make sure your device is in fastboot mode or download mode).

10: Click on the Scan and Download Button to begin the “Stock firmware” Flashing Process.

Once the Stock ROM Flashing process is completed, disconnect your device from the Computer and restart it.

Disclaimer:

  • Please read and understand the Full Guide before flashing “Huawei Y3 2017 Firmware”.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM on must have a 70–80% charge.