Tab S2 SM-T817R4 Binary 1 Firmware 4 Files

The specific Galaxy Tab S2 SM-T817R4 U1 Firmware Download Package has a Stock ROM of Galaxy Tab S2 SM-T817R4 U1. This helps bypass the FRP lock and revert from the root and custom ROM.

Advertisement

Samsung Galaxy Tab S2 SM-T817R4 Binary 1 Firmware

There are various reasons to flash “Stock Firmware on Galaxy Tab S2 SM-T817R4 U1“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Pre-requirements:

Galaxy Tab S2 SM-T817R4 U1 Stock ROM Details:

Gapps: Included
Device Supported: Galaxy Tab S2 SM-T817 Binary 1, U1, Bit 1
Tool Supported: Odin
OS Ver: Android 5.1, Android 6.0, Android 7.0
[quads id=2]
T817R4TYU 1 CQI5_T817R4USC1CQI5_USC_7.0.zip AFH OneDrive GDrive2
T817R4TYU 1 BPD5_T817R4USC1BPD5_USC_6.0.1.zip AFH OneDrive GDrive2
T817R4TYU 1 AOH6_T817R4USC1AOH6_5.1.1.zip AFH OneDrive GDrive2

How To Install Galaxy Tab S2 SM-T817R4 U1 Stock Firmware:

1: Download and Install the Samsung USB Driver on your computer.

2: Download and extract the Galaxy Tab S2 SM-T817R4 U1 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.

6: Open Odin. Then, connect your phone to the pc.

7: After connecting the smartphone to the computer, Odin will automatically recognize the device and display the “Added” message in the lower left panel.

8: Once Odin detects your device, click the PDA button, and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

When your Galaxy Tab S2 SM-T817R4 U1 finally boots up, you should run your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy Tab S2 SM-T817R4 U1 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from the use of the information in this guide.
  • Phone must have a 70–80% charge.