SM-P205 Binary 5 Firmware (P205UBU5BTFB)

In this step-by-step guide, I explain how to update Samsung smartphones’ Galaxy Tab A 2019 SM-P205 Binary 5 firmware. The Android firmware update allows you to edit the operating system to the latest version, improving performance, functionality, and security.

Advertisement

Performing the Galaxy Tab A 2019 SM-P205 U5 Security Patch Level 2020-07-01 (1 July 2020) firmware update is quite simple, but the steps to follow are several and must be followed in precise order.

Samsung Galaxy Tab A 2019 SM-P205 U5 Android 10 Q Brazil ZTO – P205UBU5BTFB

There are various reasons to flash “Stock Firmware on Galaxy Tab A 2019 SM-P205 U5. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Prerequisites:

Galaxy Tab A 2019 SM-P205 U5 Stock ROM Details:

SM-P205 U5 Brazil ZTO – P205UBU5BTFB:

Model SM-P205 Binary 5 U5, S5, Bit 5
Region / Country Brazil
Language Multi-Language
Android version Android 10 Q
Operator Clean ZTO (without logo, operator apps)
PDA P205UBU5BTFB
CSC P205OWO5BTFB
Product code ZTO
Build Date Fri, 26 Jun 2020
Security Patch Level 2020-07-01 (1 July 2020)
Size  2.9 GB
[quads id=2]
Download Google Drive Android File Host

How To Install Galaxy Tab A 2019 SM-P205 U5 Stock Firmware:

1: Install the Samsung USB Driver on your pc.

2: Download and extract the Galaxy Tab A 2019 SM-P205 U5 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.

6: Open Odin. Then, connect your phone to the pc.

7: After connecting the smartphone to the computer, Odin will automatically recognize the device and display the “Added” message in the lower left panel.

8: Click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once the Firmware process is completed, you will see a Green Box with a Pass written in Odin. During this process, the Smartphone will reboot automatically.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

When your Galaxy Tab A 2019 SM-P205 finally boots up, you should run your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy Tab A 2019 SM-P205 U5 Firmware.
  • Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
  • Phone must have a 70–80% charge.