If you’re looking for the Symphony V120 Firmware flash file without a password you need to flash, it can sometimes be difficult to locate online. For Symphony V120. In this Article/Tutorial about Unbrick Symphony V120. and download flash files tested and working files.

I have explained the method which is used by People or the Repairing Shops. I hope This Tutorial Will Help You To Unbrick Symphony V120 Mediatek Based Devices.

How To Flash Symphony V120 Firmware File [Stock ROM]

This article contains the Symphony V120 Firmware Flash File. That will allow you to recover your Symphony V120 mobile into its initial Factory state. Additionally, you can use the file to change your phone to the newest version. Besides these below files useful if you have used the flashed customized builds. Brick your device, change your device and also come back that device to the factory state.

The Advantages Symphony V120 Stock ROM:

Flash Stock To Unbrick your Symphony V120
Fix boot loop issue
Update and Downgrade
Unroot or Fix Bugs
To solve the lag or stutter
Fix software issues.
Return to stock for warranty coverage.

Symphony V120 Stock ROM Details:

Gapps File: Included
Device Supported: Symphony V120
Tool Supported: SP Flash Tool
Processor: MediaTek MT6580
Os: Android

Download Symphony V120 Flash File:

Symphony_V120_HW1_V6_MT6580_03062017.zip

Pre-requirements to Install Symphony V120 Stock Firmware:

Supported Phone: Symphony V120
Charge your mobile: You may no less than a half charge.
Laptop or PC.

Take Phone Backup:

Download Symphony V120 Flash Tool And Drivers:

Symphony V120 Flash Tool: Download the latest SP Flash tool and extract it (Install)
Symphony V120 VCOM driver: Get VCOM Driver and set up on your pc (still works with MT67xx phones)
Windows 10/Pro users: READ: How To Install MTK USB Vcom Driver On Windows 10 (32 & 64 bits)

Disclaimer:

Please read and understand the Full Guide Before Flashing Symphony V120 Stock ROM.
Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
In addition, Make sure that the USB drivers for your device are installed on the computer.
Before flashing, Stock ROM Symphony V120 must have a 70–80% charge.
Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Install Symphony V120 Firmware:

First Of All Extract And Run SP flash tool.
Also, Install MTK Android USB drivers.
Then download Symphony V120 Firmware.
Switch off mobile remove the battery (if removable) reinsert and plug the USB cable in the charging socket.
Now open the SP flash tool.exe.
Afterward, go to the download button in the SP flash tool.
Next In the download tab, click on the scatter load button at the right.
After locating the scatter tab, click on the download button on the top left.
Immediately connect your smartphone with a USB cable, and press volume up or volume down key for easy detection (remove and reinsert your phone battery if it is removable)
When flashing is completed, finally a green ring will appear in the SP flash tool.
Close the SP flash tool on your computer and unplug the phone.
Power on the phone and enjoy it.
After the flashing process starts, it might take up to 5–10 minutes surely. So keep patience and wait.