How To Flash Swipe Elite Envy Firmware [Stock ROM]

Swipe Elite Envy Firmware

 

Welcome To all in one thread for Swipe Elite Envy in this post I will share all kinds of Swipe Elite Envy Firmware With you. Like Ota software update fastboot ROM And QFIL flash tool. So keep in touch and stay updated with your Swipe Elite Envy software upgrade.

Why would you want to flash Firmware on your Swipe Elite Envy?

“Swipe Elite Envy Firmware” is the software that is provided by the vendor, or You may say that the software. Which was installed by the manufacturer of the phone is Swipe Elite Envy Stock Rom.

The other type of the Rom is Custom Rom which advance users installed after flashing it as per they desire. Flashing a stock Firmware means installing the system image into the device’s internal flash memory.

[quads id=2]

The Benefit Of Swipe Elite Envy Stock Firmware:

  • Fix the boot loop problem
  • Upgrade and Downgrade
  • Unroot or Fix Bugs on your phone
  • Fix the lag or stutter on
  • Revert to stock to gain your warranty
  • Will able to receive OTA Updates

Swipe Elite Envy Firmware Details:

  • Gapps: Included
  • Device Supported: Swipe Elite Envy
  • Tool Supported: QPST Tool – QFIL Qualcomm Flash Image Loader
  • Processor: Qualcomm
  • Os Ver: Android 6.0 Marshmallow

Download:

[quads id=2]

Pre-requirements to Install Swipe Elite Envy Stock ROM:

  • Supported Phone: Swipe Elite Envy
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Swipe Elite Envy Full Backup

Before going to install Swipe Elite Envy stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

Download Swipe Elite Envy Flash Tool And Drivers:

A.  Download and install Swipe Elite Envy Drivers. The necessary communication between your device and PC.

These drivers are mainly for the devices powered by Qualcomm chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the QFIL QPST Flash Tool for as Swipe Elite Envy Flash Tool because of this tool is very efficient and support all kind of Qualcomm phones.

Instructions to Flash Swipe Elite Envy Stock ROM:

1. Download and install the driver and tool above. Then launch the QFIL tool.

2. Turn off the phone (Remove the battery if possible, then insert the battery again), hold up the VOLUME KEY and plug in the USB cable to connect to the computer.

3. On the QFIL tool, select the files, in turn, select the files in the ROM folder.

4. After clicking Download, wait for the flash process to finish, the time is about 5-10.

5: During the flashing process, your device will restart automatically.

6. Once flashing is completed, Close the Qfil Tool on your computer and disconnect your Android Smartphone from the computer.

Congratulations, You have successfully installed Stock ROM using QFIL Flash tool.

Follow Detailed Instruction Firmware Flashing With Qfil Flash Tool.

Disclaimer:

  • Read and understand the Full Guide before flashing.”Swipe Elite Envy Firmware”.
  • Use these instructions at your own risk.
  • Before flashing, Stock ROM must have a 70–80% charge.