HomeStock FirmwareUmidigiUMIDIGI A9 Pro 2021 Firmware Flash File

UMIDIGI A9 Pro 2021 Firmware Flash File [MT6771 11.0]

UMIDIGI A9 Pro 2021 Firmware

If your UMIDIGI A9 Pro 2021 phone is corrupt or bricked. Download UMIDIGI A9 Pro 2021 stock firmware from here. To get it back to a working condition again. 

All you have to do is simply download the below-given UMIDIGI A9 Pro 2021 firmware files and tools on your PC. And then follow the given instruction to install the Stock ROM on UMIDIGI A9 Pro 2021 using SP Flash Tool. This guide is also helpful to unroot. Or fix any software malfunctioning problem. 

Download Firmware/Flash File For UMIDIGI A9 Pro 2021:

There are various reasons to flash (Firmware on UMIDIGI A9 Pro 2021).

For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it.  If you’re going to hard reset your phone and cannot access the recovery menu. But most of the problems and benefits that cause flashing stock ROM are below.

The Benefit Of UMIDIGI A9 Pro 2021 Firmware:

  • Flash Stock ROM to unbrick
  • Update and downgrade
  • Unroot or fix bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty
  • Keeps rebooting issue
  • If your phone boots straight into recovery
  • Phone boots straight into its bootloader

Requirements:

  • Charge your mobile: Your phone may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

  •  Take Full Backup

Before going to install stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

  • Download UMIDIGI A9 Pro 2021 Flash Tool And Drivers:

These drivers are mainly for the devices powered by the MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

  • B. We use the Sp flash tool for as UMIDIGI A9 Pro 2021 Flash Tool because of this tool is very efficient and support all kind of MTK phones.

UMIDIGI A9 Pro 2021 Firmware Details:

Device Supported: UMIDIGI A9 Pro 2021 No Twrp And Nand Backup
Tool Supported: SP Flash Tool No Customization And Over cloaking
Soc: MT6771 No ADB Ad Block
Os: Android 11.0 Pre-installed OEM apps

Advertisment
EU: UMIDIGI_A9PRO_R-E_V1-0_20210326
Non-EU: UMIDIGI_A9PRO_R_V1-0_20210324

Instructions to Flash UMIDIGI A9 Pro 2021 Stock ROM:

1. First of all Download the ‘UMIDIGI A9 Pro 2021 flash file zip‘ which is given above and extract it on your computer’s desktop. Also, download and extract the sp flash tool.

2. Then download the USB driver and set up it on your computer. In case you have already installed the USB driver on your computer skip this step.

3. Next, switch off your smartphone and take away the battery (if it is removable).

4. Now go to the sp flash tool extract folder and launch it.

5. As soon as the SP Flash tool is launch, click on the Download tab.

6. Now, click on the Scatter-loading button within the download tab.

7. Choose the scatter file from the firmware extract folder.

8. Now click on the Download button to start the flashing process.

9. Next, connect your phone to your computer using the USB cable (without battery – if the battery is removable) and press the volume up or volume down button at the same time.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.

As soon as it’s over, you will notice the Download OK green ring in SP Flash Tool.

Now, close the SP Flash tool and unplug your smartphone.

  • That’s it. Now you’ve successfully flashed stock ROM on your UMIDIGI A9 Pro 2021.

Follow Detailed Instruction To Flash Firmware With Sp Flash Tool.

Disclaimer:

  • Please read and understand the Full Guide before flashing “UMIDIGI A9 Pro 2021 Firmware”.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of MTK phones, you will have a brick even if you download these blocks read from a phone which you own!

Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Related Articles

LEAVE A REPLY

Please enter your comment!
Please enter your name here

- Advertisement -

Latest Articles