The specific QMobile X8 Plus Firmware comes with a Stock ROM of QMobile X8 Plus. This helps you to bypass FRP lock and revert from the root and custom ROM.
How To Flash QMobile X8 Plus Stock ROM:
There are various reasons to flash (Firmware on QMobile X8 Plus).
For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it. If you’re going to hard reset your phone and cannot access the recovery menu. But most of the problems and benefits that cause flashing stock ROM are below.
Requirements To Flash QMobile X8 Plus Stock ROM:
- Charge your mobile: Your phone may no less than a half charge.
- Laptop or PC: To execute this installation, you must use a PC or Laptop.
- 1. Take QMobile X8 Plus Full Backup
Before going to install QMobile X8 Plus stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.
Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.
- 2. Download QMobile X8 Plus Flash Tool And Drivers:
- A. Download and install QMobile X8 Plus Drivers. The necessary communication between your device and PC.
These drivers are mainly for the devices powered by the SPD chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.
- B. We use the Spreadtrum flash tool for as QMobile X8 Plus Flash Tool because of this tool is very efficient and support all kind of SPD phones.
Instructions to Flash QMobile X8 Plus Stock ROM:
1: Download and install SPreadtrum USB Driver on your computer.
2: Download the QMobile_X8_Plus_MP_18_09 – sp7731gea_hdplus_dt-user 5.1 LMY47D flash file.
3: Extract Spreadtrum Upgrade Tool on your computer.
4: Now open Spreadtrum Upgrade Tool .exe.
5: Once SPreadtrum Upgrade Tool is Launched, Connect your device to the computer (Make sure your device is switched off).
6: Once your Smartphone is connected successfully to the computer, click on the Load Packed Button and add the QMobile X8 Plus ROM file. (having .pac extension)
7: Once you have successfully added the. Pac file in SPD Upgrade Tool, click on the Start Downloading button to begin the flashing process.
8: Wait for 2 – 10 minutes, as the device is in the flashing process.
9: During the flashing process, your device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in SPD Upgrade Tool.
10: Close the SPD Tool on your computer and disconnect your Android Smartphone from the computer.
- Congratulations, You have successfully installed QMobile X8 Plus Stock ROM using the SPD Flash tool.
Follow Detailed Instruction To Flash Firmware With SPD Flash Tool.
Bin Packet load Error When Flashing “QMobile X8 Plus Stock Firmware File”: If you ever got Bin Packet Error then simply download and try flashing the firmware with this version of SPD Upgrade Tool.
How to Write IMEI After Flashing QMobile X8 Plus Stock Firmware File: After flashing the stock firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI on Spreadtrum Devices.
QMobile X8 Plus Firmware Details:
|Gapps: Included||No Root|
|Device Supported: QMobile X8 Plus||No Twrp And Nand Backup|
|Tool Supported: SPD Flash Tool||No Customization And Over cloaking|
|Soc: Spreadtrum||No ADB Ad Block|
|Os: Android 8 Oreo||Pre-installed OEM apps|