How To Flash Lenovo A6000 Firmware [Stock ROM]

Lenovo A6000 Firmware

Welcome To all in one thread for Lenovo A6000 in this post I will share all kinds of Official Lenovo A6000 Firmware Qualcomm Flash Files With you. Like Latest Ota software update for Lenovo A6000 tested ROM And QFIL flash tool. So keep in touch and stay updated with your Lenovo A6000 software upgrade.

Remember this will also help you if Lenovo a6000 dead after flash.

Why would you want to flash Firmware on your Lenovo A6000?

“Lenovo A6000 Firmware” is the software that is provided by the vendor, or You may say that the software. Which was installed by the manufacturer of the phone is Lenovo A6000 Stock Rom.

The other type of the Rom is Custom Rom which advance users installed after flashing it as per they desire. Flashing a stock Firmware means installing the system image into the device’s internal flash memory.

The Benefit Of Stock Firmware:

  • Fix the boot loop problem
  • Upgrade and Downgrade
  • Unroot or Fix Bugs on your phone
  • Fix the lag or stutter on
  • Revert to stock to gain your warranty
  • Will able to receive OTA Updates

Pre-requirements to Install Lenovo A6000 Stock ROM:

  • Supported Phone: Lenovo A6000
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Lenovo A6000 Full Backup

Before going to install Lenovo A6000 stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

Download Lenovo A6000 Flash Tool And Drivers:

A.  Download and install Lenovo A6000 Drivers. The necessary communication between your device and PC.

These drivers are mainly for the devices powered by Qualcomm chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the QFIL QPST Flash Tool as Qualcomm flash tool for Lenovo a6000 because of this tool is very efficient and support all kind of Qualcomm phones.

Instructions to Lenovo A6000 Stock ROM Flashing:

1. Download and install the driver and tool above. Then launch the QFIL tool.

2. Turn off the phone (Remove the battery if possible, then insert the battery again), hold up the VOLUME KEY and plug in the USB cable to connect to the computer.

3. On the QFIL tool, select the files, in turn, select the files in the ROM folder.

4. After clicking Download, wait for the flash process to finish, the time is about 5-10.

5: During the flashing process, your device will restart automatically.

6. Once flashing is completed, Close the Qfil Tool on your computer and disconnect your Android Smartphone from the computer.

Congratulations, You have successfully installed Stock ROM using QFIL Flash tool.

Follow Detailed Instruction Firmware Flashing With Qfil Flash Tool.

Disclaimer:

  • Read and understand the Full Guide before flashing.”Lenovo A6000 Firmware”.
  • Use these instructions at your own risk.
  • Before flashing, Stock ROM must have a 70–80% charge.

Lenovo A6000 Firmware Details:

  • Gapps: Included
  • Device Supported: Lenovo A6000
  • Tool Supported: QPST Tool – QFIL Qualcomm Flash Image Loader
  • Processor: Qualcomm
  • Os Ver:
[quads id=2]

Download: