How To Flash Vivo Y12 Firmware File [Stock ROM]

Vivo Y12 Firmware


This time I will share a tutorial on how to flash Vivo Y12 PD1901BF firmware file. Flashing With computers in an easy and tested way on our devices. In this article, you will find Vivo Y12 PD1901BF Stock ROM.

Download the Vivo Y12 software update from here. Flash it in your device revert from Vivo y12 custom ROM and enjoy the native Android experience again.


All the solution to your problems with your phone is currently available in this article. You just need some material like Vivo Y12 PD1901BF Stock ROM, USB drivers and flash tool that is in it.

How To Flash Vivo Y12 PD1901BF Firmware File [ROM]

For the ease of my readers, I have divided this method into different parts.

1. In the first section, we will talk about the Vivo Y12 PD1901BF Firmware (flash file) benefits and link it to download.

2. The other part is the necessary tools and pre-requirements to install the Vivo Y12 PD1901BF Firmware.

3. And in the last part, we will guide you How to flash this Vivo Y12 PD1901BF ROM file,

To perform this advance process of Flashing stock ROM please Go Step by step. If you got any error then leave a comment.

The Advantages Of Vivo Y12 PD1901BF Stock ROM:

A Soft Brick or a Software Brick, is usually just when you’re phone is stuck in a boot loop, and as the name implies, is caused by a software error on Android.

Usually the lack of a system to boot from or some other minor software bug that glitching boot.

They are easily fixable by flashing the Vivo Y12 PD1901BF stock ROM on Vivo Y12 PD1901BF through recovery or with SP Flash Tool.

If your Vivo Y12 PD1901BF device turns to a soft-brick, it may:

  • Keeps Rebooting;
  • Boots Straight Into Recovery;
  • Boots Straight Into its Bootloader;
  • Freeze at the startup screen or boot Animation;

Vivo Y12 PD1901BF Stock ROM Details:

Download Vivo Y12 PD1901BF Flash File:

Gapps File:Included
Device Supported:Vivo Y12 PD1901BF
Tool Supported:SP Flash Tool

PD1901BF_EX_A_1.30.8 Vivo Y12 March update

old Releases:

Pre-requirements to Flash Vivo Y12 PD1901BF Stock Firmware File:

  • Supported Phone: Vivo Y12 PD1901BF
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

1. Take Vivo Y12 PD1901BF Backup

Before going to install stock ROM you need to take all your messages, photos, and apps from your current smartphone. This requires a backup that you then restore on your device after flashing firmware.

Most smartphones automatically make a backup in the background, in case something happens. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

2. Download Vivo Y12 PD1901BF Flash Tool And Drivers:

A. Download and install Vivo Y12 Drivers. This is for basic communication between your device and PC.

These drivers are mainly for the devices powered by MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the Sp flash tool for as Vivo Y12 PD1901BF Flash Tool procedure there are different reasons why we will use Sp Flash Tool to unbrick the Vivo Y12 PD1901BF.


  • Please read and understand the Full Guide Before Flashing Vivo Y12 PD1901BF.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM Vivo Y12 PD1901BF must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own!

Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.

Instructions to Flash Vivo Y12 PD1901BF Firmware File:

1. Download Vivo Y12 PD1901BF flash file zip file given above and extract it on your computer.

2. Download Vivo Y12 PD1901BF USB driver and set up it on your computer. In case if in case you have already put in a USB driver in your computer skip this step.

3. Next, switch off your Vivo Y12 PD1901BF smartphone and take away the battery (it’s removable).

Switch Off Vivo Y12 PD1901BF

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover the “Flash_tool.exe” file in it. Launch it.

Start SPFT For Vivo Y12 PD1901BF Firmware Flash

5. As soon as the SP Flash tool is launched, click on on “Download” tab.

How To Flash Vivo Y12 PD1901BF Firmware File [ROM] 1

6. Now, click on the “Scatter-loading” button within the download tab.

7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.

8. Now click on on the “Download” button to start out the flashing process.

Press Download For Vivo Y12 PD1901BF Firmware

9. Next, join your Vivo Y12 PD1901BF Android device to your computer by means of the unique USB cable (without battery – whether it is battery removable) and press volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.

As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

11. Now, shut the SP Flash tool in your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed stock ROM firmware in your Vivo Y12 PD1901BF Android device.

Follow Detailed Instruction Vivo Y12 PD1901BF Firmware Flashing With Sp Flash Tool.

Check Also

itel L6503 Firmware

Itel V41 Firmware Flash File [Stock ROM Download]

The specific Itel V41 Firmware comes with a Stock ROM of Itel V41. This helps …

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.