Download and Flash firmware on Intex iv0118nd Lions 6 File using the SPD Upgrade Tool. This is a tested guide showing how to unlock FRP on Intex iv0118nd Lions 6 with stock ROM.

Intex iv0118nd Lions 6 Firmware

Advertisement

Why would you want to flash Stock ROM on your Intex iv0118nd Lions 6?

There are various reasons to flash stock ROM on Ursus P410. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.  If you want to hard reset your phone and you cannot access the recovery menu. But most of the problems that cause flashing stock ROM are.

  • Flash Stock ROM To Unbrick
  • Update and downgrade
  • Unroot or fix bugs on the phone
  • To solve the lag or stutter
  • Fix software issues.
  • Revert back to stock to get your warranty
  • Keeps rebooting issue
  • if your phone boots straight into recovery
  • Phone boots straight into its bootloader

[quads id=2]

Requirements to flash Intex iv0118nd Lions 6 Stock ROM:

  • Supported Phone: Intex iv0118nd Lions 6
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC.

1. Take Intex iv0118nd Lions 6 Backup

Before going to install Intex iv0118nd Lions 6 stock ROM you need to take all your messages, photos, and apps from your current smartphone. This requires a backup that you then restore on your device after flashing firmware.

How To Backup Android Phone Before Flashing Stock Firmware

2. Download Intex iv0118nd Lions 6 Flash Tool And Drivers:

A.  Download and install Intex iv0118nd Lions 6 Drivers. This is for basic communication between your device and PC.

These drivers are mainly for the devices powered by MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the SPD Upgrade Tool for as Intex iv0118nd Lions 6 Flash Tool this procedure there are different reasons why we will use Sp Flash Tool to unbrick the Intex iv0118nd Lions 6.

I believe this tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Intex iv0118nd Lions 6.

Intex iv0118nd Lions 6 Stock ROM Details:

  • Gapps File: Yes
  • Device Supported: Intex iv0118nd Lions 6
  • Tool Supported: SPD Upgrade Tool
  • Soc: Spreadtrum
  • Android ver: Android 8.1 Oreo

Download

INTEX_IV0118ND_Lions_6_V08_INDIAN_User Flash Files.zip

[quads id=2]

Instructions to Install Intex iv0118nd Lions 6 Firmware:

  1. Install Spreadtrum Drivers.
  2. Install the SPD Download Tool.
  3. Open the Research download tool > bin folder.
  4. Launch ResearchDownload.exe.
  5. Click on the Load Packet icon (top left corner).
  6. In the window that pops up, navigate to the location of the Intex iv0118nd Lions 6 Firmware.pac file, select it then click Open.
  7. The PAC file should now be loaded (its name should appear at the top).
  8. Click the Settings Icon (top left corner).
  9. In the box that pops up, untick any item(s) you do not wish to flash then click OK. Ignore this step if you wish to flash all files.
  10. Click the Start downloading button.
  11. You should see Waiting…. under the Progress bar.
  12. Switch off the phone (still with battery inside) then connect it to the PC via USB cord (note that you might need to hold the volume decrease button while connecting to PC on some phones) and flashing should begin. DO NOT interrupt.
  13. Once flashing is complete, you’ll see Passed.
  14. Click on the Stop downloading icon then disconnect the phone from PC and boot.

Intex iv0118nd Lions 6 Firmware

Follow Detailed Instruction Intex iv0118nd Lions 6 Firmware Flashing With SPD Upgrade Tool.

Disclaimer:

  • Please read and understand the Full Guide Before Flashing Intex iv0118nd Lions 6 Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected.

Bin Packet load Error When Flashing Intex iv0118nd Lions 6 Firmware: If you ever got Bin Packet Error then simply download and try flashing the firmware with this version of SPD Upgrade Tool.

How to Write IMEI After Flashing Intex iv0118nd Lions 6 Firmware: After flashing the stock firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI on Spreadtrum Devices.

4 COMMENTS

Comments are closed.