Huawei Nexus 6P Nin-A1 Firmware Flash File [Stock ROM]

 

Welcome To All In One Thread For Huawei Nexus 6P Nin-A1  in this post I will share all kinds of Huawei Nexus 6P Nin-A1  Firmware With you. Like Ota software update Fastboot ROM QFIL Flash Tool And fix Nexus 6p hard bricked it So keep in touch and stay updated with your Huawei Nexus 6P Nin-A1 software upgrade.

How To Flash Huawei Nexus 6P Nin-A1 Firmware Stock ROM

Huawei Nexus 6P Nin-A1 Firmware is the software that is provided by the vendor, or You may say that the software. Which was installed by the manufacturer of the phone is Stock Rom.

The other type of the Rom is Custom Rom which advance users installed after flashing it as per they desire. Flashing a stock Firmware means installing the system image into the device’s internal flash memory.

Flash memory holds Android’s firmware. The same as most other portable devices with an embedded OS.

The Benefit Of Huawei Nexus 6P Nin-A1 Stock Firmware:

  • To Unbrick your Huawei Nexus 6P Nin-A1
  • Fix Nexus 6p boot loop
  • Nexus 6p Qualcomm hs usb qdloader 9008
  • Fix Nexus 6p edl mode
  • Fixhuawei nexus 6p diag port
  • Revert to stock to gain your warranty
  • Will able to receive OTA Updates

Huawei Nexus 6P Nin-A1 Stock Firmware Details:

  • Gapps File: Included
  • Device Supported: Huawei Nexus 6P Nin-A1
  • Tool Supported: QFIL QPST
  • Processor: Qualcomm

Download  Huawei Nexus 6P Nin-A1 Flash File:

Huawei_Nexus_6P_Nin-A1_HL0MSM8994MT011008_Board_Software_General_Android_5.1_QFIL.zip

Pre-requirements to Install Huawei Nexus 6P Nin-A1 Stock ROM:

  • Supported Phone: Huawei Nexus 6P Nin-A1
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.

Take Huawei Nexus 6P Nin-A1 Backup:

Before going to install Huawei Nexus 6P Nin-A1 stock ROM, you need to take all your messages, photos, and apps from your current smartphone. This requires a backup that you then restore on your device after flashing firmware.

Most smartphones automatically make a backup in the background, in case something happens. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

Huawei Nexus 6P Nin-A1 Flash Tool And Drivers:

We will use Qualcomm QPST to unbrick the Huawei Nexus 6P Nin-A1. This tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Huawei Nexus 6P Nin-A1.

Disclaimer:

  • Please read and understand the Full Guide Before Flashing Huawei Nexus 6P Nin-A1 Stock ROM.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • Make a backup copy of important data such as call logs, SMS, and other data; it is to if something goes wrong, your data is not affected.

Instructions to Install Huawei Nexus 6P Nin-A1 Stock ROM:

1. Download and install the Driver and Tool above. Then turn on the tool.

2. Turn off the phone (Remove the battery if possible, then insert the battery again), hold up the VOLUME KEY and plug in the USB cable to connect to the computer.

3. On the tool, select the files, in turn, select the files in the ROM folder.

4. After clicking Download, wait for the flash process to finish, the time is about 5-10

Follow Detailed Instruction Huawei Nexus 6P Nin-A1 Firmware Flashing With Qualcomm QPST.

Write A Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.