Samsung GT-B9388 Firmware [Stock ROM]

If you own a Model smartphone and want to upgrade your device’s firmware to the latest version, this guide is for you. The latest firmware version for the Model With 2023-01-01 (January 1, 2023) Security Patch Level, and in this article, we will show you how to install it on your device.

Samsung GT-B9388 Firmware

Benefits of Updating Firmware

Flashing Stock Firmware on Model.” can resolve issues like your device being stuck on the logo or help in removing the FRP lock.

  • Fix boot loop issue
  • Update and Downgrade.
  • Unroot or fix bugs
  • To solve the lag or stutter.
  • Fix software issues.
  • Revert to stock firmware

Preparation:

How To Install Samsung GT-B9388 Stock Firmware:

Download Samsung GT-B9388 Latest Firmware:

  • File Name: B9388ZMAMB1_B9388CHMAMB1_CHM.zip
    Country: China
    File Size: 718 MB
    Android Version: 4.0.4
[quads id=2]
Download Firmware/Flash File

How To Flash Samsung Stock Firmware With ODIN

1: Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.

2: Download and extract the Samsung GT-B9388 Firmware on your computer.

3: Now, Switch off your Smartphone.

4: Boot into Download Mode.

  • Press and hold the Volume Down, Home, and Power buttons simultaneously for 5-8 seconds until download mode is active; use this guide.

5: When Yellow Triangle Sign Appears . Press the Volume Up key to proceed.

Samsung GT-B9388 Firmware [Stock ROM]

6: Launch the Odin flash tool. Next, connect your phone to the pc.

7: Odin will recognize the device and show the “Added” message in the lower left panel.

8: click the PDA button and select the Samsung GT-B9388 Firmware.tar file.

9: Click the Start button.

10: Flashing typically takes about 5 minutes to complete.

After the process finishes, you will see a Green Box with Pass in Odin. And phone will then reboot automatically.

To verify the installed firmware, go to Settings → About Phone → Software Information. Check the firmware number under Baseband version.

Troubleshooting:

If issues arise during the firmware update, here are some troubleshooting steps:

  • Restart your device and retry the installation process.
  • Ensure your device has sufficient battery.
  • If you keep facing issues, your device might require a factory reset.