Galaxy Tab J SM-T285YD Firmware Flash File [Stock ROM Download]

Galaxy Tab J SM-T285YD Firmware

The specific Galaxy Tab J SM-T285YD Firmware Download Package comes with a Stock ROM of Galaxy Tab J SM-T285YD. This helps bypass the FRP lock and revert from the root and custom ROM.

Firmware/Flash File for Samsung Galaxy Tab J SM-T285YD

There are various reasons to flash “Stock Firmware on Galaxy Tab J SM-T285YD“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

If you’re going to hard reset your phone and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Prerequisites:

Galaxy Tab J SM-T285YD Stock ROM Details:

File Name: T285YDDDU0AQJ2_T285YDODD0AQJ1_BNG
Country: Bangladesh
File Size: 1 GB
Android Version:  Android 5 Lollipop
[quads id=2]
Download Mirror 1 (GDrive) Mirror 2 (GDrive)
File Name: T285YDDDU0ARD3_T285YDODD0ARD3_INS
Country:
India
File Size:
1 GB
Android Version:  5.1
Download Mirror 1 (GDrive) Mirror 2 (GDrive)
File Name: T285YDDDS0AQA1_T285YDOLD0API1_MYM
Country: Myanmar
File Size:  1 GB
Android Version:  5.1
[quads id=2]
Download Mirror 1 (GDrive) Mirror 2 (GDrive)
File Name: T285YDDDU0ARD3_T285YDODD0ARD3_NPL
Country: Nepal
File Size: 1 GB
Android Version: 5.1
Download Mirror 1 (GDrive) Mirror 2 (GDrive)
File Name:  T285YDDDU0AQJ2_T285YDODD0AQJ1_SLK
Country:  Sri Lanka
File Size
1 GB
Android Version:  5.1
Download Mirror 1 (GDrive) Mirror 2 (GDrive)
File Name:  T285YDZTU0APL2_T285YDZZT0APL2_BRI
Country: Taiwan
File Size:  1 GB
Android Version:  5.1
[quads id=2]
Download Mirror 1 (GDrive) Mirror 2 (GDrive)

How To Install Galaxy Tab J SM-T285YD Stock Firmware:

How To Flash Samsung Stock Firmware With ODIN

1: Install the Samsung USB Driver on your pc.

2: Download and extract the Galaxy Tab J SM-T285YD Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.

6: Open Odin. Then, connect your phone to the pc.

7: After connecting the smartphone to the computer, Odin will automatically recognize the device and display the “Added” message in the lower left panel.

8: Click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once the Firmware process is completed, you will be able to see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot, but don’t be alarmed.

When your Galaxy Tab J SM-T285YD finally boots up, you should run your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy Tab J SM-T285YD Firmware.
  • Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
  • Phone must have a 70–80% charge.