The specific Doogee N10 Firmware comes with a Stock ROM of Doogee N10. This helps you to bypass FRP lock and revert from the root and custom ROM.
Advertisement
How To Flash Doogee N10 Stock ROM:
There are various reasons to flash (Firmware on Doogee N10).
For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it. If you’re going to hard reset your phone and cannot access the recovery menu. But most of the problems and benefits that cause flashing stock ROM are below.
The Benefit Of Doogee N10 Firmware:
Flash Stock ROM to unbrick your Doogee N10
Update and downgrade
Unroot or fix bugs on the phone
To solve the lag or stutter
Fix software issues.
Revert to stock to get your warranty
Keeps rebooting issue
If your phone boots straight into recovery
Phone boots straight into its bootloader
Requirements To Flash Doogee N10 Stock ROM:
Charge your mobile: Your phone may no less than a half charge.
Laptop or PC: To execute this installation, you must use a PC or Laptop.
1. Take Doogee N10 Full Backup
Before going to install Doogee N10 stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.
Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.
A. Download and install Doogee N10 Drivers. The necessary communication between your device and PC.
These drivers are mainly for the devices powered by the SPD chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.
B. We use the Spreadtrum flash tool for as Doogee N10 Flash Tool because of this tool is very efficient and support all kind of SPD phones.
Instructions to Flash Doogee N10 Stock ROM:
1: Download and install SPreadtrum USB Driver on your computer.
2: Download the Doogee N10 SP9863ao_z622bq_a76-n10_doogee_20190416 flash file.
3: Extract Spreadtrum Upgrade Tool on your computer.
4: Now open Spreadtrum Upgrade Tool .exe.
5: Once SPreadtrum Upgrade Tool is Launched, Connect your device to the computer (Make sure your device is switched off).
6: Once your Smartphone is connected successfully to the computer, click on the Load Packed Button and add the Doogee N10 ROM file. (having .pac extension)
7: Once you have successfully added the. Pac file in SPD Upgrade Tool, click on the Start Downloading button to begin the flashing process.
8: Wait for 2 – 10 minutes, as the device is in the flashing process.
9: During the flashing process, your device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in SPD Upgrade Tool.
10: Close the SPD Tool on your computer and disconnect your Android Smartphone from the computer.
Congratulations, You have successfully installed Doogee N10 Stock ROM using the SPD Flash tool.
Follow Detailed Instruction To Flash Firmware With SPD Flash Tool.
Disclaimer:
Read and understand the Full Guide before flashing.”Doogee N10 Firmware”.
Use these instructions at your own risk.
Before flashing, Stock ROM on Doogee N10 must have a 70–80% charge.
Bin Packet load Error When Flashing “Doogee N10 Stock Firmware File”: If you ever got Bin Packet Error then simply download and try flashing the firmware with this version of SPD Upgrade Tool.
How to Write IMEI After Flashing Doogee N10 Stock Firmware File: After flashing the stock firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI on Spreadtrum Devices.