How To Flash Chuwi Hi9 Plus Firmware Stock ROM File

Chuwi Hi9 Plus Firmware

 

Flashing stock firmware update on Chuwi Hi9 Plus Firmware using the flash tool. This is a step by step guide showing how to roll back form Chuwi Hi9 Plus custom ROM with Sp flash tool.

Why would you want to flash Firmware on your Chuwi Hi9 Plus?

There are various reasons to flash Firmware on Chuwi Hi9 Plus. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.  If you want to hard reset your phone and you cannot access the recovery menu. But most of the problems that cause flashing stock ROM are.

The Benefit Of Chuwi Hi9 Plus Firmware:

  • Flash Stock ROM To Unbrick
  • Update and downgrade
  • Unroot or fix bugs on the phone
  • To solve the lag or stutter
  • Fix software issues.
  • Revert back to stock to get your warranty
  • Keeps rebooting issue
  • if your phone boots straight into recovery
  • Phone boots straight into its bootloader

Chuwi Hi9 Plus Firmware Details:

  • Gapps File: Included
  • Device Supported: Chuwi Hi9 Plus
  • Tool Supported: SP Flash Tool
  • Processor: MediaTek
  • OS: Android 8.0 Oreo

Download Chuwi Hi9 Plus Flash File:

[quads id=2]

Requirements to flash Chuwi Hi9 Plus Stock ROM:

  • Supported Phone: Chuwi Hi9 Plus Stock ROM
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC.

1. Take Chuwi Hi9 Plus Firmware Backup

Before going to install Chuwi Hi9 Plus stock ROM you need to take all your messages, photos, and apps from your current smartphone. This requires a backup that you then restore on your device after flashing firmware.

How To Backup Android Phone Before Flashing Stock Firmware


2. Download Chuwi Hi9 Plus Flash Tool And Drivers:

A.  Download and install Chuwi Hi9 Plus Drivers. This is for basic communication between your device and PC.

These drivers are mainly for the devices powered by MediaTek chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

B. We use the Sp flash tool for as Chuwi Hi9 Plus Flash Tool procedure there are different reasons why we will use Sp Flash Tool to unbrick the Chuwi Hi9 Plus.

I believe this tool is very efficient. Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Chuwi Hi9 Plus.

Instructions to Flash Chuwi Hi9 Plus Stock ROM:

1. Download Chuwi Hi9 Plus flash file zip file is given above and extracts it on your computer.

2. Download Chuwi Hi9 Plus USB driver and set up it on your computer. In case if in case you have already put in a USB driver in your computer skip this step.

3. Next, switch off your Chuwi Hi9 Plus smartphone and take away the battery (it’s removable).

Switch Off Chuwi Hi9 Plus

4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover the “Flash_tool.exe” file in it. Launch it.

Start SPFT For Chuwi Hi9 Plus Firmware Flash

5. As soon as the SP Flash tool is launched, click on on “Download” tab.

How To Flash Chuwi Hi9 Plus Firmware File [ROM] 1

6. Now, click on on “Scatter-loading” button within the download tab.

Chuwi Hi9 Plus Firmware Scatter Loading

7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.

Select Chuwi Hi9 Plus Firmware

8. Now click on on the “Download” button to start out the flashing process.

Press Download For Chuwi Hi9 Plus Firmware

9. Next, join your Chuwi Hi9 Plus Android device to your computer by means of the unique USB cable (without battery – whether it is battery removable) and press volume up or volume down button.

10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.

As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.

Chuwi Hi9 Plus Firmware Download Complete

11. Now, shut the SP Flash tool in your computer and unplug your smartphone.

That’s it. Now you’ve successfully flashed stock ROM firmware in your Chuwi Hi9 Plus Android device.

Follow Detailed Instruction Chuwi Hi9 Plus Firmware Flashing With Sp Flash Tool.

Disclaimer:

  • Please read and understand the Full Guide Before Flashing Chuwi Hi9 Plus.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM Chuwi Hi9 Plus must have a 70–80% charge.

Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own!

Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM.