BLU G50 Mega Firmware Flash File [SC9863A 10.0]

BLU G50 Mega Firmware

The specific BLU G50 Mega Firmware comes with a Stock ROM of BLU G50 Mega. This helps you to bypass FRP lock and revert from the root and custom ROM.

Download Firmware/Flash File For BLU G50 Mega:

There are various reasons to flash (Firmware on BLU G50 Mega).

For example, your phone will be stuck or hang on the logo. You want to remove the FRP lock from it. If you’re going to hard reset your phone and cannot access the recovery menu. But most of the problems and benefits that cause flashing stock ROM are below.

The Benefit Of BLU G50 Mega Firmware:

  • Flash Stock ROM to unbrick your BLU G50 Mega
  • Update and downgrade
  • Unroot or fix bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues.
  • Revert to stock to get your warranty
  • Keeps rebooting issue
  • If your phone boots straight into recovery
  • Phone boots straight into its bootloader

Requirements:

  • Charge your mobile: Your phone may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.
  • 1. Take BLU G50 Mega Full Backup

Before going to install BLU G50 Mega stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

  • 2. Download BLU G50 Mega Flash Tool And Drivers:
  • A.  Download and install BLU G50 Mega Drivers. The necessary communication between your device and PC.

These drivers are mainly for the devices powered by the SPD chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

  • B. We use the Spreadtrum flash tool for as BLU G50 Mega Flash Tool because of this tool is very efficient and support all kind of SPD phones.

BLU G50 Mega Firmware Details:

Disadvantage

Gapps: Included No Root
Device Supported: BLU G50 Mega No Twrp And Nand Backup
Tool Supported: SPD Flash Tool No Customization And Over cloaking
Soc: SC9863A No ADB Ad Block
Os: Android 10 Pre-installed OEM apps

Download Firmware/Flash File

Instructions to Flash BLU G50 Mega Stock ROM:

1: Download and install SPreadtrum USB Driver on your computer.

2: Download the BLU_G0390WW_V10.0.04.00_GENERIC_19-11-2020_1249 flash file.

3: Extract Spreadtrum Upgrade Tool on your computer.

4: Now open Spreadtrum Upgrade Tool .exe.

5: Once SPreadtrum Upgrade Tool is Launched, Connect your device to the computer (Make sure your device is switched off).

6: Once your Smartphone is connected successfully to the computer, click on the Load Packed Button and add the BLU G50 Mega ROM file. (having .pac extension)

7: Once you have successfully added the. Pac file in SPD Upgrade Tool, click on the Start Downloading button to begin the flashing process.

8: Wait for 2 – 10 minutes, as the device is in the flashing process.

9: During the flashing process, your device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in SPD Upgrade Tool.

10: Close the SPD Tool on your computer and disconnect your Android Smartphone from the computer.

  • Congratulations, You have successfully installed BLU G50 Mega Stock ROM using the SPD Flash tool.

Follow Detailed Instruction To Flash Firmware With SPD Flash Tool.

Disclaimer:

  • Please read and understand the Full Guide before flashing “BLU G50 Mega Firmware”.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM on BLU G50 Mega must have a 70–80% charge.

Bin Packet load Error When Flashing “BLU G50 Mega Stock Firmware File”: If you ever got Bin Packet Error then simply download and try flashing the firmware with this version of SPD Upgrade Tool.

How to Write IMEI After Flashing BLU G50 Mega Stock Firmware File: After flashing the stock firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI on Spreadtrum Devices.

Comments are closed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More