Aidata ADT1061 Firmware

The specific Aidata ADT1061 Firmware comes with a Stock ROM of Aidata ADT1061. This helps you to bypass FRP lock and revert from the root and custom ROM.

Advertisement

Download Firmware/Flash File For Aidata ADT1061:

There are various reasons to flash (Firmware on Aidata ADT1061).

For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it. If you’re going to hard reset your phone and cannot access the recovery menu. But most of the problems and benefits that cause flashing stock ROM are below.

The Benefit Of Aidata ADT1061 Firmware:

  • Flash Stock ROM to unbrick your Aidata ADT1061
  • Update and downgrade
  • Unroot or fix bugs on the phone
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock to get your warranty
  • Keeps rebooting issue
  • If your phone boots straight into recovery
  • Phone boots straight into its bootloader

Aidata ADT1061 Firmware Details:

Disadvantage

Gapps: Included No Root
Device Supported: Aidata ADT1061 No Twrp And Nand Backup
Tool Supported: SPD Flash Tool No Customization And Over cloaking
Soc: UniSoC Tiger T618 No ADB Ad Block
Os: Android 10 Pre-installed OEM apps

[quads id=2]

Download Firmware/Flash File

Requirements:

  • Charge your mobile: Your phone may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.
  • 1. Take Aidata ADT1061 Full Backup

Before going to install Aidata ADT1061 stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.

Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.

How To Backup Android Phone Before Flashing Stock Firmware

  • 2. Download Aidata ADT1061 Flash Tool And Drivers:

These drivers are mainly for the devices powered by the SPD chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.

  • B. We use the Spreadtrum flash tool for as Aidata ADT1061 Flash Tool because of this tool is very efficient and support all kind of SPD phones.

Instructions to Flash Aidata ADT1061 Stock ROM:

1: Download and install SPreadtrum USB Driver on your computer.

2: Download the Aidata ADT1061 flash file.

3: Extract Spreadtrum Upgrade Tool on your computer.

4: Now open Spreadtrum Upgrade Tool .exe.

5: Once SPreadtrum Upgrade Tool is Launched, Connect your device to the computer (Make sure your device is switched off).

6: Once your Smartphone is connected successfully to the computer, click on the Load Packed Button and add the Aidata ADT1061 ROM file. (having .pac extension)

7: Once you have successfully added the. Pac file in SPD Upgrade Tool, click on the Start Downloading button to begin the flashing process.

8: Wait for 2 – 10 minutes, as the device is in the flashing process.

9: During the flashing process, your device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in SPD Upgrade Tool.

10: Close the SPD Tool on your computer and disconnect your Android Smartphone from the computer.

  • Congratulations, You have successfully installed Aidata ADT1061 Stock ROM using the SPD Flash tool.

Follow Detailed Instruction To Flash Firmware With SPD Flash Tool.

Disclaimer:

  • Read and understand the Full Guide before flashing.”Aidata ADT1061 Firmware”.
  • Use these instructions at your own risk.
  • Before flashing, Stock ROM on Aidata ADT1061 must have a 70–80% charge.

Bin Packet load Error When Flashing “Aidata ADT1061 Stock Firmware File”: If you ever got Bin Packet Error then simply download and try flashing the firmware with this version of SPD Upgrade Tool.

How to Write IMEI After Flashing Aidata ADT1061 Stock Firmware File: After flashing the stock firmware on Spreadtrum Device, you may need to flash the IMEI also, for that use WriteIMEI on Spreadtrum Devices.