Sony Xperia XZ3 Stock Firmware [Android 9.0.0 52.0.A.11.32]

Sony Xperia XZ3 Stock Firmware

If you own Sony Xperia XZ3 and looking for Sony Xperia XZ3 Firmware. ADB Driver, and Fastboot Driver suitable for your device. then this is the right place to download Sony Xperia XZ3 ADB Driver, Android USB Driver, and Fastboot Drivers.

Sony Xperia XZ3 Stock Firmware -How To Flash Guide

The Advantages Of Sony Xperia XZ3 Firmware:


  • Supported Phone: Ulefone Armor 8
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.
  • Backup Android Phone
  • Download Flashtool-
  • And the drivers are located usually C: / FlashTool / Drivers After installing Flash Tools.

Sony Xperia XZ3 Firmware Details:

  • Gapps File: Included
  • Device Supported: Sony Xperia XZ3
  • Tool Supported: Flashtool-
  • Os: Android 9.0.0 52.0.A.11.32
[quads id=2]
Download Firmware/Flash File

How To Install Sony Xperia XZ3 Stock Firmware:

Download the Flash Tool and USB Drivers on your PC. Follow the below Guide to install the firmware using the Sp Flash tool.

Guide to Install Stock ROM using Sony Flash Tool:

Step 1: Open Flash tools and click the distance as described in the image.

Step 2: In the next window, click “Flashmode” and then “OK” as in the image.

Step 3: In the next window, select the Sony Xperia X Performance SO-04H Stock ROM.TFT File and “OK” as in the image.

Step 4: See that in the next window will take a while, it is preparing the files.

Step 5: At an average of 10sec, a new window will appear.

Step 6: As in the picture above calls, turn off your phone, press “back” (if it does not, press volume – less), be pressed, and connect the USB cable.

Step 7: Wait for the process to finish, until like the image below, remove the USB and turn on your smartphone.


  • Please read and understand the Full Guide Before Flashing.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.
Exit mobile version