Sony XPERIA M2 Aqua D2403 Android 4.4.4 Official Firmware Flash Files

Sony XPERIA M2 Aqua D2403 Android 4.4.4 Official Firmware Flash Files

Sony Xperia M2 Aqua D2403 Android 4.4.4 Official Firmware Flash Files

Download Sony Xperia M2 Aqua D2403 Flash Files.

The Benefit Of Stock ROM:

Sometime when we are trying to gain root access and installing CWMor TWRP recovery. Most people have bricked the Sony Devices, (Unbrick) with the Stock Firmware we can flash Official Firmware and bring our Sony Smartphone Back to work anytime. Also if you think your Sony Mobile Phone lag or has a problem, then flash the Stock firmware from the list below and save from the situation. If we flash Stock ROM files it doesn’t void a warranty on your Sony Devices.

We will use The Sony Flash Tool to unbrick the Sony Mobile. This tool is really very efficient. Just Follow the step by step procedure to use One Click Unbrick Tool and unbrick your Sony Device.


  • is not responsible for any damage happened to your devices while following this guide so please proceed at your own risk. However, we would be happy to help with any problems within our reach.
  • Please Read and understand the Full Guide Before Flashing umer Stock Rom.
  • Make sure that the USB drivers for your device are installed on the computer.
  • Your smartphone must have a 70–80% charge.
  • If you are going to flash the Stock Firmware on your Sony device, then take a backup of important data such as Contacts, Call logs, SMS, and other data as because your personal data will be deleted after flashing the Stock Firmware.

Take Phone Backup:

1- Backup your Call Log – Contacts – Sms – Etc With G Backup


How To Flash Stock ROM /Unbrick Sony Firmware With Flash Tool:

Step 1. Download Flashtool-

Step 2. And the drivers The drivers are located usually C: / FlashTool / Drivers After installing Flash Tools.

Step 3. Open Flash tools and click the distance as described in the image below.


Step 4. In the next window, click “Flashmode” and then “OK” as in the image below.


Step 5. In the next window, select the Rom and “OK” as in the image below.


Step 6. see that in the next window will take a while, it is preparing the files.
Step 7. At an average of 10sec, a new window will appear.
Step 8. As in the picture above calls, turn off your phone, press “back” (if it does not, press volume – less), be pressed and connect the USB cable.
Step 9.Wait for the process to finish, until like the image below, remove the USB and turn on your smartphone.

Comments are closed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Do NOT follow this link or you will be banned from the site!
Please disabled adblocker to keep our website live.After Disabled Click Refresh button
  1. Click on the "ABP" icon in the top-right of your browser
  2. Click on "Enabled on this site" to disable for