Sony XPERIA 5 Stock Firmware Android 10 – 55.1.A.0.748

Advertisements

If you own Sony XPERIA 5 and looking for Sony XPERIA 5 Firmware. ADB Driver, and Fastboot Driver suitable for your device. then this is the right place to download Sony XPERIA 5 ADB Driver, Android USB Driver, and Fastboot Drivers.

Sony XPERIA 5 Stock Firmware -How To Flash Guide

The Advantages Of Sony XPERIA 5 Firmware:

  • Flash Stock ROM to solve the boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs on the phone
  • To solve the lag or stutter
  • By flashing Stock ROM, you can fix software issues
  • Revert back to stock to get your warranty

Pre-requirements:

  • Supported Phone: Ulefone Armor 8
  • Charge your mobile: You may no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.
  • Backup Android Phone
  • Download Flashtool-0.9.11.0-windows.exe
  • And the drivers are located usually C: / FlashTool / Drivers After installing Flash Tools.

Sony XPERIA 5 Firmware Details:

  • Gapps File: Included
  • Device Supported: Sony XPERIA 5
  • Tool Supported: Flashtool-0.9.11.0
  • Os: Android 10
Advertisements
DownloadJ9210_NOBA_55.1.A.0.748 .rar
DownloadSony_Xperia_5_901SO_55.0.E.1.208_1319-8987_R9A_SoftBank_Japan.zip

How To Install Sony XPERIA 5 Stock Firmware:

Download the Flash Tool and USB Drivers on your PC. Follow the below Guide to install the firmware using the Sp Flash tool.

Guide to Install Stock ROM using Sony Flash Tool:

Step 1: Open Flash tools and click the distance as described in the image.

Step 2: In the next window, click “Flashmode” and then “OK” as in the image.

Step 3: In the next window, select the Sony Xperia X Performance SO-04H Stock ROM.TFT File and “OK” as in the image.

Step 4: See that in the next window will take a while, it is preparing the files.

Step 5: At an average of 10sec, a new window will appear.

Step 6: As in the picture above calls, turn off your phone, press “back” (if it does not, press volume – less), be pressed, and connect the USB cable.

Step 7: Wait for the process to finish, until like the image below, remove the USB and turn on your smartphone.

Disclaimer:

  • Please read and understand the Full Guide Before Flashing.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
  • Before flashing, Stock ROM must have a 70–80% charge.