SM-A310M Combination Files is licensed service firmware. You can flash the SM-A310M with this developer software in order to inspect all hardware features like back camera, front camera, sensors, RAM memory, ROM memory. You may also run a test that gives you the results of the SM-A310M diagnostics. What’s especially important this special firmware can be used to bypass and remove Factory Reset Protection, Google Account verification or Google Account protection. In the table below we present the list of all SM-A310M Combination firmware that you can download.

The Samsung Galaxy A3 (2016) is powered by 1.5GHz quad-core processor and it comes with 1.5GB of RAM. The phone packs 16GB of internal storage that can be expanded up to 128GB via a microSD card. As far as the cameras are concerned, the Samsung Galaxy A3 (2016) packs a 13-megapixel primary camera on the rear and a 5-megapixel front shooter for selfies.

The Samsung Galaxy A3 (2016) runs Android 5.1 and is powered by a 2300mAh nonremovable battery. It measures 134.50 x 65.20 x 7.30 (height x width x thickness) and weighs 132.00 grams.

The Samsung Galaxy A3 (2016) is a single SIM (GSM) smartphone that accepts a Regular-SIM. Connectivity options include Wi-Fi, GPS, Bluetooth, NFC, FM, 3G, and 4G. Sensors on the phone include Compass/ Magnetometer, Proximity sensor, Accelerometer, and Ambient light sensor.

SM-A310M Combination File [Samsung A3 2016]:

A SM-A310M Combination File is a test mode does not have the effect of fixing the hardware, but only the test function of the operation or damage. However, Combination file has the ability to recover IMEI, Baseband or some software errors but not all. By using a combination file you will lose all features … including call, play games, web history, pictures. etc.

[quads id=2]

SM-A310M Combination File Details:

• File Name: COMBINATION_FAC_FA51_A310MUBU3ARK1_FAC3ARK1_CL6964464_QB20389179_REV00_user_mid_noship.tar.md5
• Size: 1 GB
• Model: SM-A310M
• Model Name: Samsung Galaxy A3 (2016)
• Security Patch Level: Level: U3 ( BIT 3 )

Download

Server 1 – Server 2

[quads id=2]

Disclaimer:

• Please Read and understand the Full Guide Before Flashing SM-A310M Combination File.
• Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
• Make sure that the USB drivers for your device are installed on the computer.
• Your smartphone must have a 70–80% charge.
• Make a backup copy of important data such as call logs, SMS, and other data, it is to if something goes wrong, your data is not affected

Flashing Tool And Drivers:

• Download Odin and run the .exe file.
• Download  Samsung Kies and simply install it will set up all drivers.

Instruction to Flash SM-A310M Combination File with Odin:

1. Open Odin Software.
2. Click on “AP” and give the path of “SM-A310M Combination File”.
3. Wait 1-2 minute until file successfully added in Odin AP field.
4. Once file added successfully in Odin tool, let reboot “Galaxy A7” in download mode.
5. Put SM-A310M in Download Mode
6. Switch off the SM-A310M device.
7. Press & Hold (Power Key + Home Button + Volume Down Key) together until you see “Warning” error on your screen.
8. Press (Volume UP) key to continue.
9. Now you are in “Download Mode”.
10. Connect SM-A310M to the computer via good “Micro USB Cable”.
11. Once you see in Odin software that “ID COM” has converted to blue, that means your device has successfully connected to computer & Odin software.
12. Now click on “START” button from “Odin Software” to flash with combination file.
13. Once you see a sign of “Pass!” in Odin software, means you have flashed successfully.
14. Disconnect SM-A310M from the computer.
15. SM-A310M will auto reboot to “Factory Binary”.

[quads id=2]

How To Enable Developer SM-A310M:

1. Bring “Menu” by swiping from up to down.
2. Tap on “Settings Gear icon”.
3. After that, tap on “About Phone”.
4. Now tap 7 times quickly on “Build Number” to enable “Developer Mode”.
5. After that, you will see “Mode Crash Watchdog!”. Just wait here.
6. Now you will see “CP Crash UPLOAD Mode“.
7. Press & Hold (Volume DOWN + Power Key) until it shuts down.
8. By pressing “Power Key” to switch on your device,
9. Now again go to “Settings” by swiping from up to down.
10. Now go to “Developer Options”.
11. Make sure “USB Debugging” is enabled.
12. Switch off the device by pressing the power key.

Now you can carry on to reset/bypass frp lock or Samsung or Google account on Samsung A3 2016 SM-A310M as you like.