Welcome To all in one thread for Sharp Aquos S3 Mini in this post I will share all kinds of Sharp Aquos S3 Mini Firmware With you. Like Ota software update fastboot ROM And QFIL flash tool. So keep in touch and stay updated with your Sharp Aquos S3 Mini software upgrade.
How To Flash Sharp Aquos S3 Mini Firmware Stock ROM
“Sharp Aquos S3 Mini Firmware” is the software that is provided by the vendor, or You may say that the software. Which was installed by the manufacturer of the phone is Sharp Aquos S3 Mini Stock Rom.
The other type of the Rom is Custom Rom which advance users installed after flashing it as per they desire. Flashing a stock Firmware means installing the system image into the device’s internal flash memory.
The Benefit Of Stock Firmware:
- Flash Stock ROM to unbrick your Sharp Aquos S3 Mini
- Fix the boot loop problem
- Upgrade and Downgrade
- Unroot or Fix Bugs on your phone
- Fix the lag or stutter on
- Revert to stock to gain your warranty
- Will able to receive OTA Updates
Pre-requirements to Install Sharp Aquos S3 Mini Stock ROM:
- Supported Phone: Sharp Aquos S3 Mini
- Charge your mobile: You may no less than a half charge.
- Laptop or PC: To execute this installation, you must use a PC or Laptop.
1. Take Sharp Aquos S3 Mini Full Backup
Before going to install Sharp Aquos S3 Mini stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.
Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.
How To Backup Android Phone Before Flashing Stock Firmware
2. Download Sharp Aquos S3 Mini Flash Tool And Drivers:
A. Download and install Sharp Aquos S3 Mini Drivers. The necessary communication between your device and PC.
These drivers are mainly for the devices powered by Qualcomm chipset. With these drivers, you can transfer files, flash the firmware files on the device, etc.
B. We use the QFIL QPST Flash Tool for as Sharp Aquos S3 Mini Flash Tool because of this tool is very efficient and support all kind of Qualcomm phones.
Instructions to Flash Sharp Aquos S3 Mini Stock ROM:
1. Download and install the driver and tool above. Then launch the QFIL tool.
2. Turn off the phone (Remove the battery if possible, then insert the battery again), hold up the VOLUME KEY and plug in the USB cable to connect to the computer.
3. On the QFIL tool, select the files, in turn, select the files in the Sharp Aquos S3 Mini ROM folder.
4. After clicking Download, wait for the flash process to finish, the time is about 5-10.
5: During the flashing process, your device will restart automatically.
6. Once flashing is completed, Close the Qfil Tool on your computer and disconnect your Android Smartphone from the computer.
Congratulations, You have successfully installed Sharp Aquos S3 Mini Stock ROM using QFIL Flash tool.
Follow Detailed Instruction Sharp Aquos S3 Mini Firmware Flashing With Qfil Flash Tool.
Disclaimer:
- Read and understand the Full Guide before flashing.”Sharp Aquos S3 Mini Firmware”.
- Use these instructions at your own risk.
- Before flashing, Stock ROM on Sharp Aquos S3 Mini must have a 70–80% charge.
Sharp Aquos S3 Mini Firmware: |
Disadvantage |
| Gapps: Included | No Root |
| Device Supported: Sharp Aquos S3 Mini | No Twrp And Nand Backup |
| Tool: QPST Tool – QFIL Qualcomm Flash Image Loader | No Customization And Over cloaking |
| Soc: QCOM SD 630 | No ADB Ad Block |
| Os: Android 7.1 | Pre-installed OEM apps |
| Get Link |