Home How To How To Setup the Philips TAH1205 Headphone

How To Setup the Philips TAH1205 Headphone

Philips TAH1205 Headphone

The Philips Headphone TAH1205 is a high-quality audio device that can be easily configured for use with a variety of electronic devices such as mobile phones, tablets, laptops and computers. Headset setup can be done simply and quickly by following a few basic steps.

To set up the Philips TAH1205 headphones, the first step is to make sure the device is charged and turned on. Next, you need to pair your headset with your desired audio device, usually via a Bluetooth connection.

Once the headset is paired with the audio device, it is possible to adjust sound and volume settings, as well as customize control options such as playing, pausing, forwarding and rewinding music tracks, for example.

How to pair Philips Headphone TAH1205?

To pair the Philips Headphone TAH1205 with an Android phone/iPhone, follow the steps below:

Android:

  1. Before starting, make sure your headphones are fully charged and turned off.
  2. Then press and hold the power button for 4 seconds until the LED flashes blue and white alternately.
  3. Now go to the cell phone’s Bluetooth and see if the feature is enabled.
  4. After activating the cell phone’s Bluetooth function, tap on “Philips TAH1205”, it should appear in the “Available Devices” section.
  5. Finally, confirm the pairing in the pop-up that opens.

iPhone:

  1. Turn on the Philips TAH1205 headphones by pressing and holding the power button until the LED indicator light starts to flash.
  2. On your iPhone, go to “Settings” and select “Bluetooth”.
  3. Make sure Bluetooth is turned on and wait until your Philips TAH1205 headphones appear in the list of available devices.
  4. Tap the Philips TAH1205 headphones name to connect.
  5. If prompted, enter the headphones pairing code (usually “0000”).
  6. Once connected, the LED indicator light on your headphones will stop flashing and remain lit.

Computer/laptop:

  1. Make sure your computer/laptop’s Bluetooth is turned on.
  2. Turn on the Philips TAH1205 headphones by pressing and holding the power button until the LED indicator light starts to flash.
  3. On your computer, go to the Bluetooth settings and select “Add Bluetooth or another device”.
  4. Select “Bluetooth” and wait for your computer to search for nearby Bluetooth devices.
  5. When your Philips TAH1205 headphones appear in the list of available devices, select them and click “Pair”.
  6. Follow any other instructions that may appear on your computer screen to complete the pairing process.
  7. When the pairing process is complete, you should hear a confirmation tone in your headphones and the LED indicator light should stop flashing and remain solid.

Note: If your headphones do not appear in the list of available devices, check that your headphones are in pairing mode by pressing and holding the power button until the LED indicator light starts flashing rapidly.

How to use Philips TAH1205 headphone controls?

Now that you’ve paired the headphones with your device, see below how to use the controls to play music, answer calls, etc.

  • Power on: press and hold the power button for 2 seconds
  • Power off: press and hold the power button for 4 seconds (blue LED turns off).
  • Play/Pause Music: Press the Call/Music Control button once.
  • Play the next track: While playing a song, press the Volume + button twice.
  • Play previous track: while playing a song, press the Volume – button twice.
  • Answer/Hang up a call: Press the Call/Music Control button once.
  • Switch Call During a Call: Press and hold the Call/Music Control button for 2 seconds.

Headphone LED indicator status

The LED indicator on the headphones is a convenient and visual way to communicate with the user, making it easier to understand the functionality of the device. See the meaning of each of them below:

  • The LED will flash blue every 5 seconds when the headphones are connected to a device, in standby mode or while playing music.
  • The LED flashes blue and white alternately when the headphones are ready for pairing.
  • The LED flashes blue every 10 seconds when the headphones are on but not connected to a device (if no connection is established, the headphones will turn off).
  • The LED flashes 3 times in white (every minute) when the battery is low.
  • The LED turns off when the battery is fully charged.
  • The LED flashes white during charging and turns off when the headphones are fully charged. Typically, a full charge takes 2 hours.

How to reset Philips Headphone TAH1205?

If you are experiencing connection or sound-related issues, you can try to resolve this by resetting the headphones to their factory settings. See the instructions below to reset your headset:

  1. Put the headset in pairing mode. The LED alternately flashes white and blue.
  2. Then press and hold the Volume + and Volume – buttons (at the same time) for more than 4 seconds.
  3. When the LED lights are blue, the handset is already reset.

If you followed the steps above and the issue is not resolved, use the troubleshooter information at the bottom of this page.

Battery charge information

According to the supplied specifications, the battery is capable of providing power for music playback for up to 15 hours, provided the Bass Boost feature is turned off. In addition, it is possible to talk on the cell phone for 15 hours with a full battery charge. In standby mode, the battery is capable of lasting up to 240 hours. Finally, the battery charging time is 2 hours.

Tip: If you start to run out of battery power, a 15-minute quick charge will let you listen to your music for up to 3 hours.

Troubleshooting: Philips Headphone TAH1205

If you are experiencing issues with your Philips TAH1205 headphones, here are some troubleshooting steps you can try:

  • Make sure the headphones are fully charged by connecting them to a power source using the included USB cable. The charging LED should light up when the headphones are charging.
  • Turn on the headphones by pressing and holding the power button for a few seconds. Make sure the headphones are in pairing mode by holding the power button for a few more seconds until the LED light flashes quickly.
  • Make sure the headphones are paired with the device you want to use them with. If not, put the headphones in pairing mode and try connecting them to the device again.
  • Make sure the volume on both the headphones and the device you are using them with is turned up.
  • Disconnect and reconnect the headphones from the device you are using them with.
  • Try resetting your headphones by following the steps explained on this page.

If none of these steps resolves the issue, contact Philips customer support for technical assistance.

NO COMMENTS

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Exit mobile version