Galaxy S8 Plus SM-G9550 Binary 3 Firmware - Full Repair

The specific Galaxy S8 Plus SM-G9550 U3 Firmware Download Package has a Stock ROM of Galaxy S8 Plus SM-G9550 U3. This helps bypass the FRP lock and revert from the root and custom ROM.

Advertisement

Galaxy S8 Plus SM-G9550 Binary 3 Firmware – Full Repair

There are various reasons to flash “Stock Firmware on Galaxy S8 Plus SM-G9550 U3“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

If you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Prerequisites:

Galaxy S8 Plus SM-G9550 U3 Stock ROM Details:

G9550ZHS 3 DSF5 G9550ZZH3DSF5 TGY FULL OS9 3.0G DOWNLOAD
G9550ZHU 3 DSF2 G9550ZZH3DSF2 TGY FULL OS9 3.0G DOWNLOAD
G9550ZCS 3 DSD5 G9550CHC3DSD5 CHC FULL OS9 2.9G DOWNLOAD
G9550ZCU 3 DSC9 G9550CHC3DSC9 CHC FULL OS9 2.9G DOWNLOAD
G9550ZCS 3 CRL1 G9550CHC3CRL1 CHC FULL 8.0 2.6G DOWNLOAD
G9550ZCU 3 CRK2 G9550CHC3CRK2 CHC FULL 8.0 2.6G DOWNLOAD
G9550ZHU 3 CRG5 G9550ZZH3CRG5 TGY FULL 8.0 2.8G DOWNLOAD
[quads id=2]

How To Install Galaxy S8 Plus SM-G9550 U3 Stock Firmware:

1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, then Skip this Step.

2: Download and extract the Galaxy S8 Plus SM-G9550 U3 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.

6: Now, Download and open Odin. Then connect your Smartphone to the computer.

7: After connecting the smartphone to the computer, Odin will automatically recognize the device and display the “Added” message in the lower left panel.

8: Click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once the Firmware process is completed, you will see a Green Box with a Pass written in Odin. During this process, the Smartphone will reboot automatically.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

When your Galaxy S8 Plus SM-G9550 finally boots up, you should run your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy S8 Plus SM-G9550 U3 Firmware.
  • Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
  • Phone must have a 70–80% charge.