Home Stock Firmware S9 + SM-G965U1 U2 Combination File – G965USQU2ARF2

S9 + SM-G965U1 U2 Combination File – G965USQU2ARF2

S9 + SM-G965U1 Binary 2 Combination File

An S9 + SM-G965U1 U2 Combination File is a test mode that does not have the effect of fixing the hardware but only the test function of the operation or damage.

However, a Combination file can recover IMEI, Baseband, or some software errors, but not all. Using a combination file will lose all features, including calls, play games, web history, and pictures. Etc.

Samsung S9 Plus SM-G965U1 Binary 2 Combination File – G965USQU2ARF2

Samsung combination firmware (Samsung factory binary) and Samsung official firmware are provided in similar file names with little difference. Samsung combination firmware is being provided for repair purposes at Samsung service and Samsung official firmware for everyday usage for Smartphone users.

The Advantages Of Combination File:

  • The technician or the developer can thoroughly read and test the device’s equipment, and it is considered the service menu.
  • Downgrade Your device and install software system Android version older than the current version.
  • Unlock the device protection with the Google Account Google FRP.
  • Fixe the Root device key-DRK problem.
  • Fix the problems of stopping the Samsung device in the Recovery Mode.
  • Fix the problems of stopping Samsung devices in the Samsung logo.
  • Fixed problems with the IMEI serial number.

Pre-requirements:

  • Supported Phone: S9 + SM-G965U1 U2
  • Charge your mobile: You may charge no less than a half charge.
  • Laptop or PC: To execute this installation, you must use a PC or Laptop.
  • Backup Android Phone
  • Download Odin Latest
  • Download and install the Samsung USB Driver

S9 + SM-G965U1 U2 Combination Firmware Details:

Model SM-G965U1
Language Multi-Language
Android version Android 8.0 Oreo
PDA G965USQU2ARF2
Date June / 2018
Revision 2
Size / Size 1.1 GB

Combination File S9 + SM-G965U1 U2 Binary 2 Bit 2
COMBINATION_FAC_FA80_G965USQU2ARF2_FACFAC_CL13230190_QB18677297_REV01

Advertisements
Download Google Drive  Android File Host 

How To Install S9 + SM-G965U1 U2 Combination File:

Download the Odin and Samsung USB Driver on your PC. Follow the below link to install the firmware using the Odin flash tool.

How To Flash Samsung Combination File

1: Download and Install Samsung USB Driver on your computer. If Samsung USB Driver is already installed on your computer, then Skip this Step.

Advertisements

2: Download and extract the S9 + SM-G965U1 U2 Combination File files on your computer.

3: Now, Switch off your Smartphone.

4: After switching off the phone, you must boot into Download Mode. To boot into download mode.

[highlight color=”yellow”] Press and hold the Volume Down, Home, and Power buttons simultaneously for 5-8 seconds until download mode is active. [/highlight]

5: You can see a Warning Yellow Triangle Sign in the Download mode. In this situation, you must press the Volume Up key to continue.

6: Now, Download and open Odin. Then, connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and show the “Added” message at the lower-left panel.

8: Once Odin detects your device, click the PDA button and select the S9 + SM-G965U1 U2 Combination File.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

Advertisements

10: Flashing usually takes 30-50 seconds to complete the process on your Phone.

The once Combination File process is completed, you will be able to see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you see, the Pass message in Odin, you can disconnect your Device from the computer.

Disclaimer:

  • Please read and understand the Full Guide before flashing “S9 + SM-G965U1 U2 Combination File.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device, resulting from the use of information in this guide.
  • Before flashing, the Combination File on S9 + SM-G965U1 U2 must have a 70–80% charge.

Previous articleWiko Y50 Firmware Flash File [Stock ROM]
Next articleGalaxy Tab Active 2 SM-T395 U9 Firmware – T395UBS9CTG1
Always had a strong interest in the Android operating system. Experience with Git and self-hosted WordPress blogs led him to the understanding that an online presence was the logical next step for his business. It's about uniqueness and individuality!