Galaxy S8 SM-G950F U9 Firmware – G950FXXU9DTF1
The specific Galaxy S8 SM-G950F U9 Firmware Download Package has a Stock ROM of Galaxy S8 SM-G950F U9 Security Patch Level 2020-06-01 (1 June 2020). This helps bypass the FRP lock and revert from the root and custom ROM.
Samsung Galaxy S8 SM-G950F U9 – G950FXXU9DTF1
There are various reasons to flash “Stock Firmware on Galaxy S8 SM-G950F U9“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: Galaxy S8 SM-G950F U9
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Galaxy S8 SM-G950F U9 Stock ROM Details:
Galaxy S8 SM-G950F U9 – G950FXXU9DTF1:
Model: | SM-G950F Binary 9 U9, S9, Bit 9 |
Region / Country: | Portugal |
Language: | Multi-Language |
Android version: | Android 9 Pie |
Operator: | Clean MEO (without logo, operator apps) |
PDA: | G950FXXU9DTF1 |
CSC: | G950FOXJ9DTF1 |
Product code: | MEO |
Build Date: | 12 Jun 2020 |
Security Patch Level: | 2020-06-01 (1 June 2020) |
Size: | 3.1 GB |
Download | Google Drive | Android File Host |
How To Install Galaxy S8 SM-G950F U9 Stock Firmware:
Download the Odin and USB Drivers on your PC. Follow the below link to install the firmware using the Odin Flash tool.
How To Flash Samsung Stock Firmware With ODIN
1: Install the Samsung USB Driver on your pc.
2: Download and extract the Galaxy S8 SM-G950F U9 Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Turn off the phone and boot into Download Mode.
Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.
5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.
6: Open Odin. Then, connect your phone to the pc.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Click the PDA button and select the Firmware.tar file.
9: Now, click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete on your Phone.
Once the Firmware process is completed, you will see a Green Box with a Pass written in Odin. During this process, the Smartphone will reboot automatically.
Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
You should run your desired firmware when your Galaxy S8 SM-G950F U9 finally boots up.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Galaxy S8 SM-G950F U9 Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.