Home Stock Firmware Galaxy S8 SM-G9500 U3 Combination File

Galaxy S8 SM-G9500 U3 Combination File

SM-G9500 Binary 3 Combination File

A Galaxy S8 SM-G9500 U3 Combination File is a test mode that does not have the effect of fixing the hardware but only the test function of the operation or damage.

However, a Combination file can recover IMEI, Baseband, or some software errors, but not all. Using a combination file will lose all features, including calls, play games, web history, and pictures. Etc.

Galaxy S8 SM-G9500 Binary 3 Combination File

Samsung combination firmware (Samsung factory binary) and Samsung official firmware are being provided in similar file names with little difference. Samsung combination firmware is offered for repair at Samsung service, and smartphone users use Samsung official firmware for everyday usage.

The Advantages Of Combination File:

  • The technician or the developer can thoroughly read and test the Device’s equipment, which is considered the service menu.
  • Downgrade Your Device and install software system Android version older than the current version.
  • Unlock the device protection with the Google Account Google FRP.
  • Fix the Root device key-DRK problem.
  • Fix the problems of stopping the Samsung device in the Recovery Mode.
  • Fix the problems of stopping Samsung devices in the Samsung logo.
  • Fixed problems with the IMEI serial number.

Pre-requirements:

Galaxy S8 SM-G9500 U3 Combination File Details:

File  Bit Size
COMBINATION_FA70_G9500ZCU 3 ARG1
U3, Binary 3, Bit 3 755M
Advertisements

How To Install Galaxy S8 SM-G9500 U3 Combination File:

Download the Odin and Samsung USB Driver on your PC. Follow the below link to install the firmware using the Odin Flash tool.

How To Flash Samsung Combination File

1: Download and Install the Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, Skip this Step.

2: Download and extract the [highlight color=”yellow”]Galaxy S8 SM-G9500 U3 Combination File[/highlight] files on your computer.

Advertisements

3: Now, Switch off your Smartphone.

4: After switching off the phone, you must boot into Download Mode. To boot into download mode.

Press and hold the Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.

5: You can see a Warning Yellow Triangle Sign in the Download mode. In this situation, you must press the Volume Up key to continue.

6: Now, Download and open Odin. Then, connect your Smartphone to the computer.

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the Device and show the “Added” message in the lower left panel.

8: Once Odin detects your Device, click the PDA button and select the Galaxy S8 SM-G9500 U3 Combination File.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

Advertisements

10: On your phone, flashing usually takes 30-50 seconds to complete.

Once the Combination File process is completed, you will see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you see the Pass message in Odin, you can disconnect your Device from the computer.

Disclaimer:

  • Please read and understand the Full Guide before flashing “Galaxy S8 SM-G9500 U3 Combination File.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your Device resulting from using the information in this guide.
  • Before flashing, the Combination File on Galaxy S8 SM-G9500 U3 must have a 70–80% charge.

Previous articleGalaxy S8 SM-G9500 U2 Combination File – Download
Next articleGalaxy S8 SM-G9500 U4 Combination File
Always had a strong interest in the Android operating system. Experience with Git and self-hosted WordPress blogs led him to the understanding that an online presence was the logical next step for his business. It's about uniqueness and individuality!