S8 Plus SM-G9550 Binary 4 Firmware

The specific Galaxy S8 Plus SM-G9550 U4 Firmware Download Package has a Stock ROM of Galaxy S8 Plus SM-G9550 U4. This helps bypass the FRP lock and revert from the root and custom ROM.

Advertisement

Galaxy S8 Plus SM-G9550 Binary 4 Firmware – Full Repair

There are various reasons to flash “Stock Firmware on Galaxy S8 Plus SM-G9550 U4“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Return to stock for warranty coverage.

Pre-requirements:

Galaxy S8 Plus SM-G9550 U4 Stock ROM Details:

G9550ZCS 4 DSI1 G9550CHC4DSI1 CHC FULL OS9 2.9G DOWNLOAD
G9550ZCU 4 DSH2 G9550CHC4DSH2 CHC FULL OS9 2.9G DOWNLOAD
G9550ZHU 4 DSG2 G9550ZZH4DSG2 TGY FULL OS9 3.0G DOWNLOAD
[quads id=2]

How To Install Galaxy S8 Plus SM-G9550 U4 Stock Firmware:

1: Download and Install Samsung USB Driver on your computer. If a Samsung USB Driver is already installed on your computer, then Skip this Step.

2: Download and extract the Galaxy S8 Plus SM-G9550 U4 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: In Download mode, a Warning Yellow Triangle Sign will appear. simply press the Volume Up key.

6: Open Odin. Then, connect your phone to the pc.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button, and choose the Firmware.tar file.

9: Click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

The once Firmware process is completed you will be able to see a Green Box with Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you see the Pass message in Odin, you can disconnect your device from the pc.

When your Galaxy S8 Plus SM-G9550 finally boots up, you should be running your desired firmware.

If you want to check that the correct firmware is installed, head to Settings –> About Phone –> Software Information. The firmware number is located under the “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy S8 Plus SM-G9550 U4 Firmware.
  • Use these instructions at your own risk.
  • Phone must have a 70–80% charge.