Download Samsung firmware for Galaxy S21 FE 5G SM-G990E with region XSG in the United Arab Emirates. This firmware has version number PDA G990EXXS1BVB8 and CSC G990EOJM1BVB8. The operating system of this firmware is Android 12 S.
Samsung Galaxy S21 FE 5G SM-G990E XSG PDA G990EXXS1BVB8
There are various reasons to flash “Stock Firmware. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.
The Advantages Of Stock ROM:
- Fix boot loop issue
- Update and Downgrade
- Unroot or Fix Bugs
- To solve the lag or stutter
- Fix software issues.
- Revert to stock firmware
Pre-requirements:
- Supported Phone: SM-G990E United Arab Emirates– (Region XSG)
- Ensure it’s at least 50% charged.
- Laptop or PC.
- Backup Android Phone
- Download and install the Samsung USB Driver
- Download Odin’s Latest version
Firmware Details:
Galaxy S21 FE 5G SM-G990E XSG PDA G990EXXS1BVB8:
Model | SM-G990E |
Name | Galaxy S21 FE 5G |
Region | XSG – United Arab Emirates |
OS Version | 12 S |
PDA | G990EXXS1BVB8 |
CSC | G990EOJM1BVB8 |
MODEM | G990EXXS1BVB8 |
Size | 5.92 GB |
changelist | 23341753 |
build date | 2022-02-18 |
Security Patch Level | 2022-02-01 |
binary | 1 |
Download | Google Drive |
How To Install Samsung Stock Firmware:
1: Download and Install Samsung USB Driver on your computer. If a Samsung USB Driver is installed on your computer, Skip this Step.
2: Download and extract the SM-G990E United Arab Emirates– (Region XSG) Firmware files on your computer.
3: Now, Switch off your Smartphone.
4: Boot into Download Mode.
Press and hold Volume Down, Home, and Power button at the same time for 5-8 seconds until download mode is active.
5: In Download mode a Warning Yellow Triangle Sign appeares . Press Volume Up to proceed.
6: Now, Download and open Odin. Then connect your Smartphone to the computer.
7: Odin will detect the device and show the “Added message in the lower-left panel.”.
8: Once Odin detects your device, click on the PDA button and select the Firmware.tar file.
9: Click the Start button in Odin to begin the Flashing.
10: Flashing usually takes 30-50 seconds to complete the process on your Phone.
Once you see the Pass message in Odin, you can disconnect your device from the pc.
When your phone finally boots up, you should now be running your desired firmware.
To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”
Disclaimer:
- Read and understand the Full Guide before flashing.”Stock Firmware“.
- Use these instructions at your own risk. We are not liable for any outcomes on your device due to following the information in this guide.
- Phone must have a 70–80% charge.