S20 Ultra SM-G988B Binary 3 Firmware

The specific S20 Ultra SM-G988B Binary 3 Firmware Download Package has a Stock ROM of S20 Ultra SM-G988B U3 Security Patch Level 2020-07-01 (1 July 2020). This helps bypass the FRP lock and revert from the root and custom ROM.

Advertisement

Galaxy S20 Ultra SM-G988B U3 Firmware

There are various reasons to flash “Stock Firmware on Galaxy S20 Ultra SM-G988B U3“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Prerequisites:

Galaxy S20 Ultra SM-G988B U3 Stock ROM Details:

Model SM-G988B Binary 3 U3, S3, Bit 3
Region / Country Brazil
Language Multi-Language
Android version Android 10 Q
Operator Clean ZTO (without logo, operator apps)
PDA G988BXXU3ATFG
CSC G988BOWO3ATFG
Product code ZTO
Build Date 23 Jun 2020
Security Patch Level 2020-07-01 (1 July 2020)
Size 4.9 GB
[quads id=2]
Download 4File Google Drive AHF

How To Install Galaxy S20 Ultra SM-G988B U3 Stock Firmware:

1: Install the Samsung USB Driver on your pc.

2: Download and extract the Galaxy S20 Ultra SM-G988B U3 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: A Warning Yellow Triangle Sign appears in Download mode. Press the Volume Up key to proceed.

6: Open Odin. Then, connect your phone to the pc.

7: After connecting the smartphone to the computer, Odin will automatically recognize the device and display the “Added” message in the lower left panel.

8: Click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once the Firmware process is completed, you will see a Green Box with a Pass written in Odin. During this process, the Smartphone will reboot automatically.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.

You should run your desired firmware when your Galaxy S20 Ultra SM-G988B U3 finally boots up.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy S20 Ultra SM-G988B U3 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from using information in this guide.
  • Phone must have a 70–80% charge.