Galaxy S20 SM-G980F U2 Firmware [Stock ROM]

S20 SM-G980F Binary 2 Firmware

The specific Galaxy S20 SM-G980F U2 Firmware Download Package comes with a Stock ROM of Galaxy S20 SM-G980F U2 Security Patch Level 2020-05-01 (1 May 2020). This helps you to bypass the FRP lock and revert from the root and custom ROM.

Samsung Galaxy S20 SM-G980F U2 Firmware

There are various reasons to flash “Stock Firmware on Galaxy S20 SM-G980F U2“. For instance, if your phone gets stuck on the logo and you need to remove the FRP lock from it.

If you’re going to reset your phone hard and cannot access the recovery menu. But most of the problems that cause flashing stock ROM are below.

The Advantages Of Stock ROM:

  • Fix boot loop issue
  • Update and Downgrade
  • Unroot or Fix Bugs
  • To solve the lag or stutter
  • Fix software issues.
  • Revert to stock firmware

Pre-requirements:

Galaxy S20 SM-G980F U2 Stock ROM Details:

Model SM-G980F Binary 2 (U2, S2, Bit 2)
Region / Country Brazil
Language Multi-Language
Android version Android 10 Q
Operator / Operator Clean ZTO (without logo, operator apps)
PDA G980FXXU2ATE6
CSC G980FOWO2ATE6
Product code ZTO
Build Date 14 May 2020
Security Patch Level 2020-05-01 (1 May 2020)
Size 5 GB
[quads id=2]
Download 4File Google Drive Android File Host

How To Install Galaxy S20 SM-G980F U2 Stock Firmware:

How To Flash Samsung Stock Firmware With ODIN

1: Download and Install the Samsung USB Driver on your computer.

2: Download and extract the Galaxy S20 SM-G980F U2 Firmware files on your computer.

3: Now, Switch off your Smartphone.

4: Turn off the phone and boot into Download Mode.

Press and hold Volume Down, Home and Power button at the same time for 5-8 seconds until download mode is active.

5: In the Download mode, you can see a Warning Yellow Triangle Sign. In this situation, you must press the Volume Up key to continue.

6: Open Odin. Then, connect your phone to the pc.

7: Odin will detect the device and show the “Added message in the lower-left panel.”.

8: Click the PDA button and select the Firmware.tar file.

9: Now, click the Start button in Odin to begin the Flashing.

10: Flashing usually takes 30-50 seconds to complete on your Phone.

Once the Firmware process is completed you will be able to see a Green Box with a Pass written on it in Odin. During this process, the Smartphone will reboot automatically.

Once you spot the “Pass” message in Odin, you can unplug your device from the computer.
The flashing process will begin and should take about 10–12 minutes. Your device may take some time to reboot, but don’t be alarmed.

When your Galaxy S20 SM-G980F U2 finally boots up, you should now be running your desired firmware.

To verify the installed firmware, go to Settings –> About Phone –> Software Information. Check the firmware number under “Baseband version.”

Disclaimer:

  • Read and understand the Full Guide before flashing.”Galaxy S20 SM-G980F U2 Firmware.
  • Use these instructions at your own risk. We will not be responsible for everything that happens to your device resulting from using information in this guide.
  • Phone must have a 70–80% charge.